We;ll replace the cables. The configuration seems to be OK. Also, this rack was used in the bootcamp last week and there were no issues reported. I wonder if it broke down over night :-)
-- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: [email protected] Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Sat, Nov 13, 2010 at 12:16, Di Bias, Steve <[email protected]> wrote: > Configuration looks good, what happens if you harcode them to mode on? If > that doesnt help i agree with jason > > Sent from my T-Mobile myTouch 3G Slide > > ----- Reply message ----- > From: "Jason Maynard" <[email protected]> > Date: Sat, Nov 13, 2010 9:12 am > Subject: [OSL | CCIE_RS] Proctorlabs hardware issue? > To: "'Jay Taylor'" <[email protected]>, "'CCIE OSL'" > <[email protected]> > > Hey Jay, > > > > I am pretty sure I that I have seen this as well some time ago. > > > > Not sure what it the problem was but I do know my configuration was correct > so I just moved on > > > > Not sure if this helps > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Jay Taylor > Sent: November-13-10 11:28 AM > To: CCIE OSL > Subject: [OSL | CCIE_RS] Proctorlabs hardware issue? > > > > I'm having an issue where whichever port I add last to an etherchannel > between Cat1 and Cat2 will continually bounce. Configuration looks correct; > is this a hardware issue? > > Cat1: > > interface FastEthernet0/23 > switchport trunk encapsulation dot1q > switchport mode trunk > channel-group 12 mode desirable > ! > interface FastEthernet0/24 > switchport trunk encapsulation dot1q > switchport mode trunk > channel-group 12 mode desirable > ! > interface Port-channel12 > switchport trunk encapsulation dot1q > switchport mode trunk > > > Cat1(config)#do sh eth sum > Flags: D - down P - bundled in port-channel > I - stand-alone s - suspended > H - Hot-standby (LACP only) > R - Layer3 S - Layer2 > U - in use f - failed to allocate aggregator > > M - not in use, minimum links not met > u - unsuitable for bundling > w - waiting to be aggregated > d - default port > > > Number of channel-groups in use: 1 > Number of aggregators: 1 > > Group Port-channel Protocol Ports > ------+-------------+-----------+----------------------------------------------- > 12 Po12(SU) PAgP Fa0/23(P) Fa0/24(P) > > > Cat2: > > interface FastEthernet0/23 > switchport trunk encapsulation dot1q > switchport mode trunk > channel-group 12 mode desirable > ! > interface FastEthernet0/24 > switchport trunk encapsulation dot1q > switchport mode trunk > channel-group 12 mode desirable > ! > interface Port-channel12 > switchport trunk encapsulation dot1q > switchport mode trunk > > > Cat2(config)#do sh eth sum > Flags: D - down P - bundled in port-channel > I - stand-alone s - suspended > H - Hot-standby (LACP only) > R - Layer3 S - Layer2 > U - in use f - failed to allocate aggregator > > M - not in use, minimum links not met > u - unsuitable for bundling > w - waiting to be aggregated > d - default port > > > Number of channel-groups in use: 3 > Number of aggregators: 3 > > Group Port-channel Protocol Ports > ------+-------------+-----------+----------------------------------------------- > 12 Po12(SU) PAgP Fa0/23(P) Fa0/24(P) > 23 Po23(SU) LACP Fa0/19(P) Fa0/20(P) > 24 Po24(SU) LACP Fa0/21(P) Fa0/22(P) > > > > > UHS Confidentiality Notice: This e-mail message, including any attachments, > is for the sole use of the intended recipient(s) and may contain > confidential and privileged information. Any unauthorized review, use, > disclosure or distribution of this information is prohibited, and may be > punishable by law. If this was sent to you in error, please notify the > sender by reply e-mail and destroy all copies of the original message. > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
