No, not for the switches. Setup there should be pretty straight-forward. -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert
FREE CCIE training: http://bit.ly/vLecture Mailto: [email protected] Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Sat, Nov 13, 2010 at 12:13, Jay Taylor <[email protected]> wrote: > Yea, I know there's some 'magic' going on behind the scenes and we only see > what they want us to see as far as topology goes so I opened a ticket with > support about it. > > On Sat, Nov 13, 2010 at 12:12 PM, Jason Maynard <[email protected]> > wrote: >> >> Hey Jay, >> >> >> >> I am pretty sure I that I have seen this as well some time ago. >> >> >> >> Not sure what it the problem was but I do know my configuration was >> correct so I just moved on >> >> >> >> Not sure if this helps >> >> >> >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Jay Taylor >> Sent: November-13-10 11:28 AM >> To: CCIE OSL >> >> Subject: [OSL | CCIE_RS] Proctorlabs hardware issue? >> >> >> >> I'm having an issue where whichever port I add last to an etherchannel >> between Cat1 and Cat2 will continually bounce. Configuration looks correct; >> is this a hardware issue? >> >> Cat1: >> >> interface FastEthernet0/23 >> switchport trunk encapsulation dot1q >> switchport mode trunk >> channel-group 12 mode desirable >> ! >> interface FastEthernet0/24 >> switchport trunk encapsulation dot1q >> switchport mode trunk >> channel-group 12 mode desirable >> ! >> interface Port-channel12 >> switchport trunk encapsulation dot1q >> switchport mode trunk >> >> >> Cat1(config)#do sh eth sum >> Flags: D - down P - bundled in port-channel >> I - stand-alone s - suspended >> H - Hot-standby (LACP only) >> R - Layer3 S - Layer2 >> U - in use f - failed to allocate aggregator >> >> M - not in use, minimum links not met >> u - unsuitable for bundling >> w - waiting to be aggregated >> d - default port >> >> >> Number of channel-groups in use: 1 >> Number of aggregators: 1 >> >> Group Port-channel Protocol Ports >> >> ------+-------------+-----------+----------------------------------------------- >> 12 Po12(SU) PAgP Fa0/23(P) Fa0/24(P) >> >> >> Cat2: >> >> interface FastEthernet0/23 >> switchport trunk encapsulation dot1q >> switchport mode trunk >> channel-group 12 mode desirable >> ! >> interface FastEthernet0/24 >> switchport trunk encapsulation dot1q >> switchport mode trunk >> channel-group 12 mode desirable >> ! >> interface Port-channel12 >> switchport trunk encapsulation dot1q >> switchport mode trunk >> >> >> Cat2(config)#do sh eth sum >> Flags: D - down P - bundled in port-channel >> I - stand-alone s - suspended >> H - Hot-standby (LACP only) >> R - Layer3 S - Layer2 >> U - in use f - failed to allocate aggregator >> >> M - not in use, minimum links not met >> u - unsuitable for bundling >> w - waiting to be aggregated >> d - default port >> >> >> Number of channel-groups in use: 3 >> Number of aggregators: 3 >> >> Group Port-channel Protocol Ports >> >> ------+-------------+-----------+----------------------------------------------- >> 12 Po12(SU) PAgP Fa0/23(P) Fa0/24(P) >> 23 Po23(SU) LACP Fa0/19(P) Fa0/20(P) >> 24 Po24(SU) LACP Fa0/21(P) Fa0/22(P) >> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
