Thanks for looking at this, two sets of eyes are always better.
R5#sh ip bgp
BGP table version is 14, local router ID is 192.0.0.5
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 192.0.0.1/32 192.0.245.4 0 47 11314 i
*>i 192.0.12.1 0 100 0 11314 i
r>i192.0.0.2/32 192.0.0.2 0 100 0 i
* i192.0.0.4/32 192.0.245.4 0 100 0 47 i
* 192.0.245.4 0 0 47 i
* 192.0.237.7 100 0 (23) 47 i
*> 192.0.57.7 0 47 i
*> 192.0.0.5/32 0.0.0.0 0 32768 i
* i192.0.0.6/32 192.0.245.4 0 100 0 47 69 i
* 192.0.245.4 0 47 69 i
* 192.0.237.7 100 0 (23) 47 69 i
*> 192.0.57.7 0 47 69 i
* i192.0.0.7/32 192.0.245.4 0 100 0 47 i
* 192.0.245.4 0 47 i
* 192.0.237.7 100 0 (23) 47 i
*> 192.0.57.7 0 0 47 i
* i192.0.0.9/32 192.0.245.4 0 100 0 47 69 i
* 192.0.245.4 0 47 69 i
* 192.0.237.7 100 0 (23) 47 69 i
*> 192.0.57.7 0 47 69 i
* 192.0.0.13/32 192.0.245.4 0 47 11314 i
*>i 192.0.12.1 0 100 0 11314 i
* 192.0.0.14/32 192.0.245.4 0 47 11314 i
*>i 192.0.12.1 0 100 0 11314 i
* 192.0.0.21/32 192.0.245.4 0 47 11314 i
*>i 192.0.12.1 0 100 0 11314 i
*> 192.0.0.23/32 192.0.235.23 0 100 0 (23) i
*> 192.0.0.52/32 0.0.0.0 0 32768 i
R5#sh ip ro
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
O E1 192.0.12.0/24 [110/2270] via 192.0.52.2, 01:03:14, Serial0/2/0
O E1 192.0.46.0/24 [110/4446] via 192.0.57.7, 01:06:32, FastEthernet0/1.57
O E1 192.14.13.0/24 [110/2270] via 192.0.52.2, 01:03:14, Serial0/2/0
O 192.0.47.0/24 [110/2] via 192.0.57.7, 01:06:32, FastEthernet0/1.57
O E1 192.0.211.0/24 [110/2270] via 192.0.52.2, 01:03:14, Serial0/2/0
O E1 192.13.14.0/24 [110/2270] via 192.0.52.2, 01:03:14, Serial0/2/0
C 192.0.25.0/24 is directly connected, FastEthernet0/0
O E1 192.0.127.0/24 [110/7778] via 192.0.57.7, 01:06:33, FastEthernet0/1.57
O E1 192.0.129.0/24 [110/4446] via 192.0.57.7, 01:06:33, FastEthernet0/1.57
O E1 192.0.212.0/24 [110/2270] via 192.0.52.2, 01:03:15, Serial0/2/0
192.0.245.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.0.245.0/24 is directly connected, Serial0/1/0
O 192.0.245.2/32 [110/48] via 192.0.52.2, 01:03:15, Serial0/2/0
C 192.0.57.0/24 is directly connected, FastEthernet0/1.57
O E1 192.0.131.0/24 [110/2270] via 192.0.52.2, 01:03:15, Serial0/2/0
O E1 192.0.79.0/24 [110/4446] via 192.0.57.7, 01:06:33, FastEthernet0/1.57
C 192.0.235.0/24 is directly connected, FastEthernet0/1.235
O E1 192.0.112.0/24 [110/7778] via 192.0.57.7, 01:06:33, FastEthernet0/1.57
192.0.52.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.0.52.0/24 is directly connected, Serial0/2/0
C 192.0.52.2/32 is directly connected, Serial0/2/0
192.0.0.0/32 is subnetted, 14 subnets
B 192.0.0.1 [200/0] via 192.0.12.1, 01:03:09
O 192.0.0.2 [110/49] via 192.0.52.2, 01:03:16, Serial0/2/0
B 192.0.0.4 [20/0] via 192.0.57.7, 01:05:20
C 192.0.0.5 is directly connected, Loopback0
B 192.0.0.6 [20/0] via 192.0.57.7, 01:05:20
B 192.0.0.7 [20/0] via 192.0.57.7, 01:05:20
B 192.0.0.9 [20/0] via 192.0.57.7, 01:05:20
O E1 192.0.0.11 [110/7778] via 192.0.57.7, 01:06:35, FastEthernet0/1.57
O E1 192.0.0.12 [110/7778] via 192.0.57.7, 01:06:35, FastEthernet0/1.57
B 192.0.0.13 [200/0] via 192.0.12.1, 01:03:09
B 192.0.0.14 [200/0] via 192.0.12.1, 01:03:09
B 192.0.0.21 [200/0] via 192.0.12.1, 01:03:09
B 192.0.0.23 [200/0] via 192.0.235.23, 01:05:20
C 192.0.0.52 is directly connected, Loopback52
192.0.69.0/24 is variably subnetted, 2 subnets, 2 masks
O E1 192.0.69.6/32 [110/7778] via 192.0.57.7, 01:06:35, FastEthernet0/1.57
O E1 192.0.69.0/24 [110/4446] via 192.0.57.7, 01:06:35, FastEthernet0/1.57
O E1 192.0.117.0/24 [110/7778] via 192.0.57.7, 01:06:36, FastEthernet0/1.57
Patrick A. Baldwin (Alex)
Network Engineering
Colsa Corp., HOSC Contract
NASA , Marshall Space Flight Center
*Office: (256) 544-2089
ÊFax: (256) 544-8629
*E-mail: [email protected]<mailto:[email protected]>
From: Max Pierson [mailto:[email protected]]
Sent: Tuesday, January 18, 2011 2:10 PM
To: Baldwin, Patrick A.
Cc: [email protected]
Subject: Re: [OSL | CCIE_RS] IP PIM BSR
Ok, only thing left I can think of is next-hop info. What does you BGP config /
table look like?? Since RPF is using that as it's check, next-hop info must be
right.
On Tue, Jan 18, 2011 at 2:03 PM, Baldwin, Patrick A.
<[email protected]<mailto:[email protected]>> wrote:
Looks right to me
R5#sh ip pim ne
PIM Neighbor Table
Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority,
S - State Refresh Capable
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
192.0.235.23 FastEthernet0/1.235 01:03:07/00:01:36 v2 1 / DR S
192.0.52.2 Serial0/2/0 00:55:44/00:01:43 v2 1 / S P
Patrick A. Baldwin (Alex)
Network Engineering
Colsa Corp., HOSC Contract
NASA , Marshall Space Flight Center
*Office: (256) 544-2089
ÊFax: (256) 544-8629
*E-mail: [email protected]<mailto:[email protected]>
From: Max Pierson [mailto:[email protected]<mailto:[email protected]>]
Sent: Tuesday, January 18, 2011 2:02 PM
To: Baldwin, Patrick A.
Cc: [email protected]<mailto:[email protected]>
Subject: Re: [OSL | CCIE_RS] IP PIM BSR
Your multicast table shows that you have no RPF neighbors. Thats why it's
failing. Now to figure out why you have no RPF neighbors on your mcast routes.
I'd take a look at your interfaces involved to make sure they all have the
appropriate PIM statements and check "sho ip pim neighbors".
On Tue, Jan 18, 2011 at 1:42 PM, Baldwin, Patrick A.
<[email protected]<mailto:[email protected]>> wrote:
See if this helps: BTW, I have completely erased this router and reloaded it
with minimal config but the problem persists.
R5#sh ip mro
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
U - URD, I - Received Source Specific Host Report,
Z - Multicast Tunnel, z - MDT-data group sender,
Y - Joined MDT-data group, y - Sending to MDT-data group,
V - RD & Vector, v - Vector
Outgoing interface flags: H - Hardware switched, A - Assert winner
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 239.0.0.5), 00:37:54/00:02:23, RP 0.0.0.0, flags: SJCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Loopback0, Forward/Sparse, 00:37:54/00:02:23
(*, 224.0.1.40), 00:41:54/00:02:27, RP 0.0.0.0, flags: DPL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list: Null
R5#
*Jan 18 19:45:33.763: PIM-BSR(0): bootstrap (192.0.0.23) on non-RPF path
FastEthernet0/1.235 or from non-RPF neighbor 192.0.235.23 discarded
R5#
Patrick A. Baldwin (Alex)
Network Engineering
Colsa Corp., HOSC Contract
NASA , Marshall Space Flight Center
*Office: (256) 544-2089
ÊFax: (256) 544-8629
*E-mail: [email protected]<mailto:[email protected]>
From: Max Pierson [mailto:[email protected]<mailto:[email protected]>]
Sent: Tuesday, January 18, 2011 1:41 PM
To: Baldwin, Patrick A.
Cc: [email protected]<mailto:[email protected]>
Subject: Re: [OSL | CCIE_RS] IP PIM BSR
That does look right, what does your mcast routing table look like?? sho ip
mroute
On Tue, Jan 18, 2011 at 12:48 PM, Baldwin, Patrick A.
<[email protected]<mailto:[email protected]>> wrote:
Thanks for your response Max,
The route is to 235.23 so it appears correct to me.
R5#sh ip ro 192.0.0.23
Routing entry for 192.0.0.23/32<http://192.0.0.23/32>
Known via "bgp 52", distance 200, metric 0
Tag 23, type internal
Last update from 192.0.235.23 01:22:27 ago
Routing Descriptor Blocks:
* 192.0.235.23, from 192.0.235.23, 01:22:27 ago
Route metric is 0, traffic share count is 1
AS Hops 0
Route tag 23
Patrick A. Baldwin (Alex)
Network Engineering
Colsa Corp., HOSC Contract
NASA , Marshall Space Flight Center
*Office: (256) 544-2089
ÊFax: (256) 544-8629
*E-mail: [email protected]<mailto:[email protected]>
From: Max Pierson [mailto:[email protected]<mailto:[email protected]>]
Sent: Tuesday, January 18, 2011 12:43 PM
To: Baldwin, Patrick A.
Cc: [email protected]<mailto:[email protected]>
Subject: Re: [OSL | CCIE_RS] IP PIM BSR
Look at your debug a little closer. When you do a "sho ip route 192.0.0.23",
what does the next hop interface show up as??
On Tue, Jan 18, 2011 at 11:32 AM, Baldwin, Patrick A.
<[email protected]<mailto:[email protected]>> wrote:
Does anyone know if there is a bug in 12.4(24)T4 that would cause a router to
ignor BSR messages when RPF clearly is satisfied?
R5#sh ip rpf 192.0.0.23
RPF information for ? (192.0.0.23)
RPF interface: FastEthernet0/1.235
RPF neighbor: ? (192.0.235.23)
RPF route/mask: 192.0.0.23/32<http://192.0.0.23/32>
RPF type: mbgp
RPF recursion count: 0
Doing distance-preferred lookups across tables
R5#
*Jan 18 17:33:19.255: PIM-BSR(0): bootstrap (192.0.0.23) on non-RPF path
FastEthernet0/1.235 or from non-RPF neighbor 192.0.235.23 discarded
R5#
*Jan 18 17:33:53.791: PIM-BSR(0): Build v2 Candidate-RP advertisement for
192.0.0.52 priority 0, holdtime 150
*Jan 18 17:33:53.791: PIM-BSR(0): Candidate RP's group prefix
224.0.0.0/4<http://224.0.0.0/4>
*Jan 18 17:33:53.791: PIM-BSR(0): no bootstrap router address
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(24)T4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 03-Sep-10 05:38 by prod_rel_team
If I am missing something......please please tell me. I'm almost out of hair
to pull.
Patrick A. Baldwin (Alex)
Network Engineering
Colsa Corp., HOSC Contract
NASA , Marshall Space Flight Center
*Office: (256) 544-2089
ÊFax: (256) 544-8629
*E-mail:
[email protected]<mailto:[email protected]<mailto:[email protected]>>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com<http://www.ipexpert.com>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
