Quick question
- Configure traffic shaping for all traffic other than H.323 voice
destined for 200.0.0.4
- Equal-cost paths to 200.0.0.4
- Make sure traffic-shaping is enabled on both interfaces
- Bit rate allowed is 7Mbps (no excess-burst)
- Path through f0/0 do not use traffic-shape
- You may use 1 class-map but no match protocol or match
access-group specifically
The DSG showed a solution using traffic-shape (f0/1) and MQC (f0/0
My solution is with MQC since it did not state that I had to use
traffic-shape command on either interface
class-map match-all 21.2
match not protocol h323
match not access-group 100
policy-map P-21.2
class 21.2
shape average 7000000 28000 0 ß How I got the 28000 was a warning comes
up from IOS stating shape average 700000 ?
WORD bits per interval, sustained. Recommend not to configure it, the
algorithm will find out the best value .
I let IOS perform the calculation applied the policy-map, did a show
policy-map interfas0/0 and saw that IOS picked 7000000 28000 28000,
since there is a requirement not to have BE I edited the shape average to
7000000 28000 0
access-list 100 permit ip any host 200.0.0.4
interface FastEthernet0/0
ip address 150.100.220.7 255.255.255.0
duplex auto
speed auto
service-policy output P-21.2
interface FastEthernet0/1
ip address 150.100.221.7 255.255.255.0
duplex auto
speed auto
service-policy output P-21.2
do sh policy-map inter fas 0/0
FastEthernet0/0
Service-policy output: P-21.2
Class-map: 21.2 (match-all)
196 packets, 21969 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: not protocol h323
Match: not access-group 100
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 196/20045
shape (average) cir 7000000, bc 28000, be 0
target shape rate 7000000
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
do sh policy-map inter fas 0/1
FastEthernet0/1
Service-policy output: P-21.2
Class-map: 21.2 (match-all)
157 packets, 15134 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: not protocol h323
Match: not access-group 100
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 157/15765
shape (average) cir 7000000, bc 28000, be 0
target shape rate 7000000
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
Let me know if you believe I would have got the points and all feedback is
appreciated (Please include ways that you would have answered the question
and explain why you went in the direction you did)
Thanks
Jason
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
