Hi All,
I've configured 2 switches to be in the same VTP domain. I set up one
of them as VTP server and the other one as VTP client. I managed
to change the server switch VTP version to be 2 but whenever I type
version 2 command on the client I received.
Cat3(config)#vtp version 2
Cannot modify version in VTP client mode
VTP Version : running VTP1 (VTP2 capable)
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47
0xBD
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
I checked cisco online documentation and it states that if you change
the version on one of the switches to be version 2 the other capable
version 2 switches will use version 2 as well. Is that true? Can you
explain why I cannot change the version number on the client switch?
Thanks,
Regards,
Lukasz
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
