Hi Max,
I've should have spotted that before ;-/
Thanks for that,
Regards,
Lukasz
On Sun, 6 Mar 2011 21:21:47 -0800, Max Pierson wrote:
Hi Lukasz,
I've configured 2 switches to be in the same VTP domain. I set up one
of them as VTP server and the other one as VTP client. I managed
>to change the server switch VTP version to be 2 but whenever I type
version 2 command on the client I received.
Cat3(config)#vtp version 2
Configuration Revision : 0
VTP Operating Mode : Client>VTP Domain Name
:
>MD5 digest : 0x57 0xCD 0x40 0x65
0x63 0x59 0x47 0xBD
>Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Run a "sho vtp stat" on the server. I'm willing to bet it doesn't
look
like the above. As Marko stated, this is expected behavior. The
reason
is that this "client" can't talk to the server or vice-versa, since
you have no vtp domain name set (and possibly a password mis-match).
Run a "show vtp stat" on the server and make sure the domains and
passwords match ("sho vtp password" will give you the plain text). It
would appear that this "client" switch has no domain set from your
output, which is why it's VTP config isn't matching up with the
server, thus no VTP action.
-
m
HTH's,
Max
On Sun, Mar 6, 2011 at 2:51 PM, wrote:
Hi All,
I've configured 2 switches to be in the same VTP domain. I set up
one of them as VTP server and the other one as VTP client. I managed
to change the server switch VTP version to be 2 but whenever I type
version 2 command on the client I received.
Cat3(config)#vtp version 2
Cannot modify version in VTP client mode
VTP Version : running VTP1 (VTP2
capable)
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x57 0xCD 0x40 0x65
0x63 0x59 0x47 0xBD
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
I checked cisco online documentation and it states that if you
change the version on one of the switches to be version 2 the other
capable version 2 switches will use version 2 as well. Is that true?
Can you explain why I cannot change the version number on the client
switch?
Thanks,
Regards,
Lukasz
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com [1]
Links:
------
[1] http://www.ipexpert.com
[2] mailto:[email protected]
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
