This is not a bug - it's an expected behavior. Clients cannot change operating parameters in the VTP domain, only servers can. If you wish o change operating version in the domain, you should do it from the server, or on the client before changing it to client mode.
-- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: [email protected] Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Sun, Mar 6, 2011 at 18:22, <[email protected]> wrote: > Hello I found at some time that this was a BUG, then I do upgraded IOS. > > Best Regards. > > > > -----Mensaje original----- > De: [email protected] > [mailto:[email protected]] En nombre de Trony Tigno > Enviado el: Domingo, 06 de Marzo de 2011 06:19 p.m. > Para: [email protected] > CC: [email protected] > Asunto: Re: [OSL | CCIE_RS] VTP version > > Change the VTP operating mode from client to transparent or server. In > client mode, you are kind of limited on what you can do. > > Hopefully that works. > > On Sun, Mar 6, 2011 at 2:51 PM, <[email protected]> wrote: > > > Hi All, > > > > I've configured 2 switches to be in the same VTP domain. I set up one of > > them as VTP server and the other one as VTP client. I managed > > to change the server switch VTP version to be 2 but whenever I type > version > > 2 command on the client I received. > > > > Cat3(config)#vtp version 2 > > Cannot modify version in VTP client mode > > > > VTP Version : running VTP1 (VTP2 capable) > > Configuration Revision : 0 > > Maximum VLANs supported locally : 1005 > > Number of existing VLANs : 5 > > VTP Operating Mode : Client > > VTP Domain Name : > > VTP Pruning Mode : Disabled > > VTP V2 Mode : Disabled > > VTP Traps Generation : Disabled > > MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47 0xBD > > Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 > > > > I checked cisco online documentation and it states that if you change the > > version on one of the switches to be version 2 the other capable version > 2 > > switches will use version 2 as well. Is that true? Can you explain why I > > cannot change the version number on the client switch? > > > > > > > > Thanks, > > Regards, > > Lukasz > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para > USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o > reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, > le rogamos nos los comunique y proceda a su borrado. Gracias. > > Information included in this e-mail and attached files is CONFIDENTIAL and > only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without > permission is not allowed. If you have received this e-mail and you are not > the intended recipient, please let us know and erase the message and > attached files. Thank you. > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
