Thank you very much to all of you :) It gives me feeling that im in virtual Class room to discuss issues together.
Jabran Javaid > From: [email protected] > To: [email protected]; [email protected]; > [email protected] > Date: Sun, 1 May 2011 16:08:48 -0400 > Subject: RE: [OSL | CCIE_RS] ip subnet zero and no shutdown > > Jabran, as a test go ahead and issue the command "no ip subnet-zero" and then > look, now it will show up. > > R4(config-if)#do sh run | in ip subnet > > Since it's a default and already on it's not here. > > R4(config-if)#no ip subnet-zero > R4(config)#do sh run | in ip subnet > no ip subnet-zero > > Now that I turned it off it shows up. Fun! > > -----Original Message----- > From: Di Bias, Steve > Sent: Sunday, May 01, 2011 12:54 PM > To: 'Jabran Javaid'; [email protected] > Subject: RE: [OSL | CCIE_RS] ip subnet zero and no shutdown > > Jabran, since "ip subnet-zero" is the default setting then it won't show up > in the config, and I'm not sure why Cisco leaves the "no shutdown" out of the > startup/running config's? However these aren't things you should be > considered with for your CCIE studies, there are much bigger issues coming > your way ;) > > Happy labbing! > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Jabran Javaid > Sent: Sunday, May 01, 2011 12:00 PM > To: [email protected] > Subject: [OSL | CCIE_RS] ip subnet zero and no shutdown > > > > Hello, > > I am very much new and its first day to start ccie r n s preparation. i have > question > > why doesnt it show 'no shutdown' in running config > > secondly if i give command "ip subnet-zero" , it doesnt show in running > config, > my router platform is 2611XM > > =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.05.01 21:56:43 =~=~=~=~=~=~=~=~=~=~=~= > show run > Building configuration... > Current configuration : 1237 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname Rack1R1 > ! > boot-start-marker > boot-end-marker > ! > enable password cisco > ! > no aaa new-model > memory-size iomem 10 > no network-clock-participate slot 1 > no network-clock-participate wic 0 > ip cef > ! > ! > ! > --More-- ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > --More-- ! > ! > archive > log config > hidekeys > ! > ! > ! > ! > ! > ! > ! > ! > interface Loopback0 > ip address 150.1.1.1 255.255.255.0 > ! > interface FastEthernet0/0 > ip address 155.1.146.1 255.255.255.0 > duplex auto > speed auto > ! > interface Serial0/0 > no ip address > --More-- encapsulation frame-relay > ! > interface Serial0/0.1 point-to-point > ip address 155.1.0.1 255.255.255.0 > snmp trap link-status > frame-relay interface-dlci 105 > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface Serial0/1 > ip address 155.1.13.1 255.255.255.0 > ! > ip forward-protocol nd > ! > ! > ip http server > no ip http secure-server > ! > ! > --More-- ! > ! > ! > ! > control-plane > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > logging synchronous > line aux 0 > exec-timeout 0 0 > privilege level 15 > line vty 0 4 > --More-- password cisco > login > ! > ! > end > Rack1R1# > > > Jabran Javaid > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > UHS Confidentiality Notice: This e-mail message, including any attachments, > is for the sole use of the intended recipient (s) and may contain > confidential and privileged information. Any unauthorized review, use, > disclosure or distribution of this information is prohibited. If this was > sent to you in error, please notify the sender by reply e-mail and destroy > all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
