That's what makes the OSL so great ;) good luck in your studies! From: Jabran Javaid [mailto:[email protected]] Sent: Sunday, May 01, 2011 9:49 PM To: Di Bias, Steve; [email protected] Subject: RE: [OSL | CCIE_RS] ip subnet zero and no shutdown
Thank you very much to all of you :) It gives me feeling that im in virtual Class room to discuss issues together. Jabran Javaid > From: [email protected] > To: [email protected]; [email protected]; > [email protected] > Date: Sun, 1 May 2011 16:08:48 -0400 > Subject: RE: [OSL | CCIE_RS] ip subnet zero and no shutdown > > Jabran, as a test go ahead and issue the command "no ip subnet-zero" and then > look, now it will show up. > > R4(config-if)#do sh run | in ip subnet > > Since it's a default and already on it's not here. > > R4(config-if)#no ip subnet-zero > R4(config)#do sh run | in ip subnet > no ip subnet-zero > > Now that I turned it off it shows up. Fun! > > -----Original Message----- > From: Di Bias, Steve > Sent: Sunday, May 01, 2011 12:54 PM > To: 'Jabran Javaid'; [email protected] > Subject: RE: [OSL | CCIE_RS] ip subnet zero and no shutdown > > Jabran, since "ip subnet-zero" is the default setting then it won't show up > in the config, and I'm not sure why Cisco leaves the "no shutdown" out of the > startup/running config's? However these aren't things you should be > considered with for your CCIE studies, there are much bigger issues coming > your way ;) > > Happy labbing! > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Jabran Javaid > Sent: Sunday, May 01, 2011 12:00 PM > To: [email protected] > Subject: [OSL | CCIE_RS] ip subnet zero and no shutdown > > > > Hello, > > I am very much new and its first day to start ccie r n s preparation. i have > question > > why doesnt it show 'no shutdown' in running config > > secondly if i give command "ip subnet-zero" , it doesnt show in running > config, > my router platform is 2611XM > > =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.05.01 21:56:43 =~=~=~=~=~=~=~=~=~=~=~= > show run > Building configuration... > Current configuration : 1237 bytes > ! > version 12.4 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname Rack1R1 > ! > boot-start-marker > boot-end-marker > ! > enable password cisco > ! > no aaa new-model > memory-size iomem 10 > no network-clock-participate slot 1 > no network-clock-participate wic 0 > ip cef > ! > ! > ! > --More-- ! > no ip domain lookup > ! > multilink bundle-name authenticated > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > --More-- ! > ! > archive > log config > hidekeys > ! > ! > ! > ! > ! > ! > ! > ! > interface Loopback0 > ip address 150.1.1.1 255.255.255.0 > ! > interface FastEthernet0/0 > ip address 155.1.146.1 255.255.255.0 > duplex auto > speed auto > ! > interface Serial0/0 > no ip address > --More-- encapsulation frame-relay > ! > interface Serial0/0.1 point-to-point > ip address 155.1.0.1 255.255.255.0 > snmp trap link-status > frame-relay interface-dlci 105 > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface Serial0/1 > ip address 155.1.13.1 255.255.255.0 > ! > ip forward-protocol nd > ! > ! > ip http server > no ip http secure-server > ! > ! > --More-- ! > ! > ! > ! > control-plane > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > line con 0 > exec-timeout 0 0 > privilege level 15 > logging synchronous > line aux 0 > exec-timeout 0 0 > privilege level 15 > line vty 0 4 > --More-- password cisco > login > ! > ! > end > Rack1R1# > > > Jabran Javaid > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > UHS Confidentiality Notice: This e-mail message, including any attachments, > is for the sole use of the intended recipient (s) and may contain > confidential and privileged information. Any unauthorized review, use, > disclosure or distribution of this information is prohibited. If this was > sent to you in error, please notify the sender by reply e-mail and destroy > all copies of the original message. UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
