Check your passwords. On Sun, Aug 21, 2011 at 7:11 AM, Ufuk Eskici <[email protected]> wrote: > Hi, > > According to Lab 1.1, VTP is not working. I cannot see the Cat1'a vlans on > Cat2. Why? > > Cat2(config)#do show vtp status > VTP Version : 2 > Configuration Revision : 0 > Maximum VLANs supported locally : 1005 > Number of existing VLANs : 5 > VTP Operating Mode : Client > VTP Domain Name : Lab1 > VTP Pruning Mode : Disabled > VTP V2 Mode : Disabled > VTP Traps Generation : Disabled > MD5 digest : 0xB6 0x99 0x33 0x93 0x15 0x7F 0x31 0xFE > Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 > > --------------- > > Cat1(config)#do show vtp status > VTP Version : 2 > Configuration Revision : 19 > Maximum VLANs supported locally : 1005 > Number of existing VLANs : 11 > VTP Operating Mode : Server > VTP Domain Name : Lab1 > VTP Pruning Mode : Disabled > VTP V2 Mode : Disabled > VTP Traps Generation : Disabled > MD5 digest : 0x33 0x73 0xF8 0x0E 0xEE 0x9B 0x63 0x31 > Configuration last modified by 0.0.0.0 at 3-1-93 00:53:36 > Local updater ID is 0.0.0.0 (no valid interface found) > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
