If I don't set the password, how are md5 lines are set differently? also I'm just following the workbook so it does not mention anything about dynamic desirable issue.
2011/8/21 J D'Silva <[email protected]> > The VTP passwords are not the same. You can tell by the md5 digest lines > not being the same. > > > > On Sun, Aug 21, 2011 at 6:11 AM, Ufuk Eskici <[email protected]> wrote: > >> Hi, >> >> According to Lab 1.1, VTP is not working. I cannot see the Cat1'a vlans on >> Cat2. Why? >> >> Cat2(config)#do show vtp status >> VTP Version : 2 >> Configuration Revision : 0 >> Maximum VLANs supported locally : 1005 >> Number of existing VLANs : 5 >> VTP Operating Mode : Client >> VTP Domain Name : Lab1 >> VTP Pruning Mode : Disabled >> VTP V2 Mode : Disabled >> VTP Traps Generation : Disabled >> MD5 digest : 0xB6 0x99 0x33 0x93 0x15 0x7F 0x31 0xFE >> Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 >> >> --------------- >> >> Cat1(config)#do show vtp status >> VTP Version : 2 >> Configuration Revision : 19 >> Maximum VLANs supported locally : 1005 >> Number of existing VLANs : 11 >> VTP Operating Mode : Server >> VTP Domain Name : Lab1 >> VTP Pruning Mode : Disabled >> VTP V2 Mode : Disabled >> VTP Traps Generation : Disabled >> MD5 digest : 0x33 0x73 0xF8 0x0E 0xEE 0x9B 0x63 0x31 >> Configuration last modified by 0.0.0.0 at 3-1-93 00:53:36 >> Local updater ID is 0.0.0.0 (no valid interface found) >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
