I haven't set any password. Swithces are connected to each other as in the topology.
Any suggestions? 2011/8/21 marc abel <[email protected]> > Check your passwords. > > On Sun, Aug 21, 2011 at 7:11 AM, Ufuk Eskici <[email protected]> wrote: > > Hi, > > > > According to Lab 1.1, VTP is not working. I cannot see the Cat1'a vlans > on > > Cat2. Why? > > > > Cat2(config)#do show vtp status > > VTP Version : 2 > > Configuration Revision : 0 > > Maximum VLANs supported locally : 1005 > > Number of existing VLANs : 5 > > VTP Operating Mode : Client > > VTP Domain Name : Lab1 > > VTP Pruning Mode : Disabled > > VTP V2 Mode : Disabled > > VTP Traps Generation : Disabled > > MD5 digest : 0xB6 0x99 0x33 0x93 0x15 0x7F 0x31 0xFE > > Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 > > > > --------------- > > > > Cat1(config)#do show vtp status > > VTP Version : 2 > > Configuration Revision : 19 > > Maximum VLANs supported locally : 1005 > > Number of existing VLANs : 11 > > VTP Operating Mode : Server > > VTP Domain Name : Lab1 > > VTP Pruning Mode : Disabled > > VTP V2 Mode : Disabled > > VTP Traps Generation : Disabled > > MD5 digest : 0x33 0x73 0xF8 0x0E 0xEE 0x9B 0x63 0x31 > > Configuration last modified by 0.0.0.0 at 3-1-93 00:53:36 > > Local updater ID is 0.0.0.0 (no valid interface found) > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
