I am not sure if it is possible or not. I dont remember anything in the web interface which would facilitate that so at a minimum you would likely have to ask the proctor. On some debugs you could possibly shut down the connected interfaces on neighbor routers in order to slow the debug output.
On Thu, Dec 1, 2011 at 4:51 AM, Christophe Lemaire <[email protected]> wrote: > Hi, > > I was more thinking a power off / power on... > > I'm asking because today I was doing some debug and I forgot the ospf timer > were quite aggressive... I haven't been able to stop the debug, even by > typing blindly undebug all. The only option I've found was to shutdown the > router and restart it... > > Regards, > Christophe > > > On 01 Dec 2011, at 11:27, -Hammer- wrote: > >> as in "reload"? Yes. you can write your config to memory and reload. It's >> actually recommended by many folks to be done before lunchtime for >> validation purposes but I know other folks don't do it and are still fine. >> Your call. >> >> -Hammer- >> >> "I was a normal American nerd" >> -Jack Herer >> >> >> >> On 12/01/2011 03:37 AM, Christophe Lemaire wrote: >>> Hi, >>> >>> Is it possible to power-cycle our equipments in the LAB? >>> >>> Best regards, >>> Christophe Lemaire >>> >>> Network& Security consultant >>> exp-Networks sprl >>> Tel: +32 (0)497 73 00 47 >>> Fax: +32 (0)70 40 23 32 >>> E-mail: [email protected] >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com >>> >>> http://onlinestudylist.com/mailman/listinfo/ccie_rs >>> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
