Thanks all for your valuable answers. In my case shutting down the neighbor interface wasn't enough... I had no vty access to the router neither... So I guess my best option would be to be more careful when I turn debugging on... ;-)
Christophe On Fri, Dec 2, 2011 at 3:18 AM, David Hafke <[email protected]> wrote: > Prior to starting my lab in RTP, the proctor made a point of telling us > that he could not power cycle the equipment for us. As for debugs, you > may want to consider sending it to buffer and not the console if you're > fixing to do something drastic ... that will be easier on the CPU. > > Also "reload in 10" and a healthy dose of paranoia before enabling aaa > (test your telnet access immediately) can be helpful in avoiding this > crisis. > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Christophe > Lemaire > Sent: Thursday, December 01, 2011 5:52 AM > To: -Hammer- > Cc: [email protected] > Subject: Re: [OSL | CCIE_RS] LAB environment question > > Hi, > > I was more thinking a power off / power on... > > I'm asking because today I was doing some debug and I forgot the ospf > timer were quite aggressive... I haven't been able to stop the debug, > even by typing blindly undebug all. The only option I've found was to > shutdown the router and restart it... > > Regards, > Christophe > > > On 01 Dec 2011, at 11:27, -Hammer- wrote: > >> as in "reload"? Yes. you can write your config to memory and reload. > It's actually recommended by many folks to be done before lunchtime for > validation purposes but I know other folks don't do it and are still > fine. Your call. >> >> -Hammer- >> >> "I was a normal American nerd" >> -Jack Herer >> >> >> >> On 12/01/2011 03:37 AM, Christophe Lemaire wrote: >>> Hi, >>> >>> Is it possible to power-cycle our equipments in the LAB? >>> >>> Best regards, >>> Christophe Lemaire >>> >>> Network& Security consultant >>> exp-Networks sprl >>> Tel: +32 (0)497 73 00 47 >>> Fax: +32 (0)70 40 23 32 >>> E-mail: [email protected] >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >>> >>> http://onlinestudylist.com/mailman/listinfo/ccie_rs >>> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
