I certainly wouldn't do it, if you end up being strapped for time towards the end of the day you are pretty much screwed since now you have to back to every device and REMOVE these from flash!
Thank you, Steve Di Bias Network Engineer - Information Systems Valley Health System - Las Vegas Office - 702- 369-7594 Cell - 702-241-1801 [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David Hafke Sent: Friday, December 02, 2011 7:59 AM To: Jay Taylor; J D'Silva; CCIE OSL Subject: Re: [OSL | CCIE_RS] access to flash "copy <filename> start" and then reload is a much better way to revert than trying to paste from notepad. But, you are right, seeing a bunch of files scattered about the flash is probably not something the graders would look kindly upon. From: Jay Taylor [mailto:[email protected]] Sent: Friday, December 02, 2011 8:26 AM To: J D'Silva; David Hafke; CCIE OSL Subject: Re: [OSL | CCIE_RS] access to flash I don't know the official answer but I'd be wary of saving configs to flash... I would save to text files on the desktop instead. For both my trips to the lab I used notepad a ton but didn't end up saving any text files. On Thu, Dec 1, 2011 at 10:22 PM, J D'Silva <[email protected]> wrote: It's funny you mention this... I had this exact conversation with a friend today. Having been to the lab once I don't see why it wouldn't be possible to do this, but I think that you'd almost certainly want to go around afterwards and clean up all your stray saved configs in much the same way you should remove any alias you may have used. If one was so inclined you could even used the Archive feature to set this up so every time you did a wr mem it saved a separate version... Jason On Thu, Dec 1, 2011 at 7:29 PM, David Hafke <[email protected]> wrote: > Does anyone know if it's OK to save extra copies of your configs to > flash? I think it may come in useful to get a snapshot of where you are > at various parts of the lab ... especially if you felt you were about to > step on a landmine. Not trying to toe the line of the NDA, but I > definitely had a moment where I knew pressing enter would be reaching a > point of no return. Was afraid to save my config after that ... in real > life you have TFTP to back out. No such luxury in the lab. > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs -- Jay Taylor CCIE #28391 @JTIE_6EE7 _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
