I have recieved this error a few times after modifying VTP version and
trying to create a vlan. In the past a reload seemed to fix it, but
this time I had to set VTP back to version 1 and create the VLAN, then
set back to V2. Anyone know the actual cause and how to avoid?
VLAN 1003 parent VLAN missing
APPLY VLAN changes failed.
Pod124-Cat3(config)#vlan 93
Pod124-Cat3(config-vlan)#exit
VLAN 1003 parent VLAN missing
APPLY VLAN changes failed.
Pod124-Cat3(config)#do show vtp stat
VTP Version : running VTP2
Configuration Revision : 12
Maximum VLANs supported locally : 1005
Number of existing VLANs : 15
VTP Operating Mode : Server
VTP Domain Name : LAB4
VTP Pruning Mode : Enabled
VTP V2 Mode : Enabled
VTP Traps Generation : Disabled
MD5 digest : 0x74 0xE2 0xBB 0xA6 0xEA 0x69 0xA7 0xB9
Configuration last modified by 120.49.124.13 at 12-6-11 14:52:09
Local updater ID is 120.49.124.13 on interface Lo0 (preferred interface)
Preferred interface name is lo0
Pod124-Cat3(config)#do show vlan br
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/10, Fa0/11, Fa0/12, Fa0/13
Fa0/14, Fa0/15, Fa0/16, Fa0/17
Fa0/18, Gi0/1, Gi0/2
15 R1-R5 active
16 R1-R6 active
21 R2-Cat1 active
25 R2-R5 active
26 R2-R6 active
52 R5-Cat2 active
122 R1-BB2 active
211 R2-BB1 active
233 BB2-BB3 active
533 R5-BB3 active
1002 fddi-default act/unsup
1003 trcrf-default act/unsup
1004 fddinet-default act/unsup
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1005 trbrf-default act/unsup
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
