This is incorrect with MQC based FR traffic shaping. Here there is no need to enable it with the legacy "frame-relay traffic-shaping" command since the two are not compatable. To view your FRTS using MQC you use the "show policy-map interface" command. Cheers!
Sent from G2 Johnnie Brown <[email protected]> wrote: Hi, I'm not familiar with embedding a MQC policy within a map-class, but I know it can be done. I've seen it in a video, but I haven't really practice that config yet because I'm only on Workbook Volume 1. Anyways, I think Ian is right. Anytime you use Frame Relay Traffic Shaping (utilizing map-class) you have to turn on traffic shaping by issuing the "frame-relay traffic-shaping" command on the interface prior to attaching the map-class. See example below off cisco website... interface serial0 encapsulation frame-relay frame-relay traffic-shaping frame-relay interface-dlci 200 class adjust_vc_class_rate ! map-class frame-relay adjust_vc_class_rate frame-relay cir 64000 frame-relay mincir 32000 frame-relay adaptive-shaping interface-congestion 10 HTH, Johnnie B On Sun, Dec 18, 2011 at 2:48 PM, marc abel <[email protected]> wrote: > Trying to do MQC based frame relay traffic shaping and not getting > anywhere. What am I doing wrong? > > > > > policy-map MQC-TS > class class-default > shape average 72000 > ! > interface Serial1/0 > no ip address > encapsulation frame-relay > serial restart-delay 0 > no frame-relay inverse-arp > frame-relay lmi-type ansi > ! > interface Serial1/0.28 point-to-point > ip address 10.20.28.27 255.255.255.0 > snmp trap link-status > frame-relay interface-dlci 708 > class PVC-R27-R28 > ! > map-class frame-relay PVC-R27-R28 > service-policy output MQC-TS > > R27(config)#do show traffic-shape > > R27(config)# > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
