Yeah it actually throws an error something like " disable general traffic shaping first" when you try to apply the frame-relay traffic shaping command when you have the MQC policy applied.
I think Steve is correct, I actually had it working. Just didn't know the show command to verify. On Mon, Dec 19, 2011 at 9:00 AM, Di Bias, Steve <[email protected]> wrote: > This is incorrect with MQC based FR traffic shaping. Here there is no need to > enable it with the legacy "frame-relay traffic-shaping" command since the two > are not compatable. To view your FRTS using MQC you use the "show policy-map > interface" command. Cheers! > > Sent from G2 > > Johnnie Brown <[email protected]> wrote: > > > Hi, > > I'm not familiar with embedding a MQC policy within a map-class, but I know > it can be done. I've seen it in a video, but I haven't really practice > that config yet because I'm only on Workbook Volume 1. Anyways, I think > Ian is right. Anytime you use Frame Relay Traffic Shaping (utilizing > map-class) you have to turn on traffic shaping by issuing the "frame-relay > traffic-shaping" command on the interface prior to attaching the map-class. > See example below off cisco website... > > > interface serial0 > > encapsulation frame-relay > > frame-relay traffic-shaping > > frame-relay interface-dlci 200 > > class adjust_vc_class_rate > > ! > > map-class frame-relay adjust_vc_class_rate > > frame-relay cir 64000 > > frame-relay mincir 32000 > > frame-relay adaptive-shaping interface-congestion 10 > > > > HTH, > > Johnnie B > > > On Sun, Dec 18, 2011 at 2:48 PM, marc abel <[email protected]> wrote: > >> Trying to do MQC based frame relay traffic shaping and not getting >> anywhere. What am I doing wrong? >> >> >> >> >> policy-map MQC-TS >> class class-default >> shape average 72000 >> ! >> interface Serial1/0 >> no ip address >> encapsulation frame-relay >> serial restart-delay 0 >> no frame-relay inverse-arp >> frame-relay lmi-type ansi >> ! >> interface Serial1/0.28 point-to-point >> ip address 10.20.28.27 255.255.255.0 >> snmp trap link-status >> frame-relay interface-dlci 708 >> class PVC-R27-R28 >> ! >> map-class frame-relay PVC-R27-R28 >> service-policy output MQC-TS >> >> R27(config)#do show traffic-shape >> >> R27(config)# >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > UHS Confidentiality Notice: This e-mail message, including any attachments, > is for the sole use of the intended recipient (s) and may contain > confidential and privileged information. Any unauthorized review, use, > disclosure or distribution of this information is prohibited. If this was > sent to you in error, please notify the sender by reply e-mail and destroy > all copies of the original message. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
