Hi fellas,
Guys can anyone please see what is going on with my configuration. I have
done the feasible success right for the routes heading to R7 AND R8
networks.
However, when I typed this command ( R2#sh sir 150.100.78.0 ) at R2 this
is what I get see below:
R2(config)#do sir 150.100.78.0
Routing entry for 150.100.78.0/24
Known via "eigrp 1001", distance 90, metric 2707456, type internal
Redistributing via eigrp 1001
Last update from 150.100.100.5 on Serial0/0.256, 00:11:16 ago
Routing Descriptor Blocks:
* 150.100.100.5, from 150.100.100.5, 00:11:16 ago, via Serial0/0.256
------} why the asterisk does not point at route path 150.100.25.5
instead? as mentioned at the workbook?
Route metric is 2707456, traffic share count is 1
Total delay is 41000 microseconds, minimum bandwidth is 1544 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 2
150.100.25.5, from 150.100.25.5, 00:11:16 ago, via Serial0/2
Route metric is 2707456, traffic share count is 1
Total delay is 41000 microseconds, minimum bandwidth is 1544 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 2
many thanks,
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
