Hm...I cleared the mapping already with below command. The output I put
below is after that command has been applied.
Thanks,
Lukasz
On Thu, 16 Feb 2012 15:22:58 +0530, Nandan Mathure wrote:
hi!
I think the mappings will stay until we clear them manually by "clear
ip pim rp-mapping"
Could u please confirm what solution worked for you?
Thanks,
Nandan
On Thu, Feb 16, 2012 at 5:21 AM, Lukasz wrote:
Hi All,
I hope you can help me with this one. In this task Cat1 should use
R4 as the RP for all multicast groups. To override the default
behavior in which dynamic protocol (PIM) is used over the static
configuration, I typed on cat1
ip pim rp-address 200.0.0.4 override
R4 needed
ip pim rp-address 200.0.0.4
I tried to verify the output and I can see on Cat1
Cat3550-1#show ip pim rp map
PIM Group-to-RP Mappings
Group(s) 224.0.0.0/4 [1]
RP 200.0.0.1 (?), v2v1
Info source: 200.0.0.5 (?), elected via Auto-RP
Uptime: 00:02:21, expires: 00:02:39
Group(s) 226.0.0.0/7 [2]
RP 200.0.0.2 (?), v2v1
Info source: 200.0.0.5 (?), elected via Auto-RP
Uptime: 00:02:21, expires: 00:02:36
Group(s) 228.0.0.0/8 [3]
RP 200.0.0.9 (?), v2v1
Info source: 200.0.0.5 (?), elected via Auto-RP
Uptime: 00:02:21, expires: 00:02:37
Group(s) 229.0.0.0/8 [4]
RP 200.0.0.2 (?), v2v1
Info source: 200.0.0.5 (?), elected via Auto-RP
Uptime: 00:02:21, expires: 00:02:35
Group(s) 230.0.0.0/8 [5]
RP 200.0.0.9 (?), v2v1
Info source: 200.0.0.5 (?), elected via Auto-RP
Uptime: 00:02:21, expires: 00:02:37
Group(s) 231.0.0.0/8 [6]
RP 200.0.0.2 (?), v2v1
Info source: 200.0.0.5 (?), elected via Auto-RP
Uptime: 00:02:21, expires: 00:02:36
Group(s) 232.0.0.0/5 [7]
RP 200.0.0.4 (?), v2v1
Info source: 200.0.0.5 (?), elected via Auto-RP
Uptime: 00:02:25, expires: 00:02:30
Group(s): 224.0.0.0/4 [8], Static-Override
RP: 200.0.0.4 (?)
Does that mean that the static override did not work properly as I
can see also the dynamic entries? Or that the more specific entries
are used but if there is no specific entry for the group the last
entry is used?
Thanks,
Lukasz
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com [9]
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com [10]
http://onlinestudylist.com/mailman/listinfo/ccie_rs [11]
Links:
------
[1] http://224.0.0.0/4
[2] http://226.0.0.0/7
[3] http://228.0.0.0/8
[4] http://229.0.0.0/8
[5] http://230.0.0.0/8
[6] http://231.0.0.0/8
[7] http://232.0.0.0/5
[8] http://224.0.0.0/4
[9] http://www.ipexpert.com
[10] http://www.PlatinumPlacement.com
[11] http://onlinestudylist.com/mailman/listinfo/ccie_rs
[12] mailto:[email protected]
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
