Would you please guys help me with this problem althought I have done my
configuration correctly. By the way there is neighborhood relationship
between R2 AND R6,
but there is no relationship between R2 AND R5.
R 2
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 224.0.0.0, Interface address 150.100.100.2
No backup designated router on this network
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:20
Supports Link-local Signaling (LLS)
Cisco NSF helper support enabled
IETF NSF helper support enabled
Index 1/4, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 31
Last flood scan time is 0 msec, maximum is 12 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 200.0.0.6
Suppress hello for 0 neighbor(s)
Message digest authentication enabled
Youngest key id is 2
---------------------------------------> KEY ID is different than R5, WHY?
R5
R5(config-router)#do sh ip os int s0/0.56
Serial0/0.56 is up, line protocol is up
Internet Address 150.100.100.5/24, Area 0
Process ID 1, Router ID 200.0.0.5, Network Type NON_BROADCAST, Cost: 1562
Transmit Delay is 1 sec, State DROTHER, Priority 0
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:18
Supports Link-local Signaling (LLS)
Cisco NSF helper support enabled
IETF NSF helper support enabled
Index 2/3, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 28
Last flood scan time is 0 msec, maximum is 8 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Message digest authentication enabled
Youngest key id is 1
---------------------- KEY ID IS DIFFERENT ?
R2
interface Serial0/0.256 multipoint
bandwidth 64
ip address 150.100.100.2 255.255.255.0
ip ospf message-digest-key 1 md5 IPexpert ------> I have to have two
keys one going to R5 AND one going heading to R6 with different keys and
passwords
ip ospf message-digest-key 2 md5 CCIE
delay 2000
snmp trap link-status
frame-relay map ip 150.100.100.5 205 broadcast
frame-relay map ip 150.100.100.6 206 broadcast
frame-relay map ip 150.100.100.2 206
R2(config-subif)#do sh ip os nei
Neighbor ID Pri State Dead Time Address Interface
N/A 0 ATTEMPT/DROTHER - 150.100.100.5
Serial0/0.256
200.0.0.6 0 FULL/DROTHER 00:01:46 150.100.100.6
Serial0/0.256
200.0.0.4 0 FULL/ - 00:00:37 150.100.24.4
Serial0/0.24
200.0.0.5 0 FULL/ - 00:00:33 150.100.25.5 Serial0/2
200.0.0.1 1 FULL/DR 00:00:37 150.100.12.1
FastEthernet0/1
R2(config-subif)#
R5
interface Serial0/0.56 multipoint
bandwidth 64
ip address 150.100.100.5 255.255.255.0
ip ospf message-digest-key 1 md5 IPexpert
ip ospf priority 0
delay 2000
snmp trap link-status
frame-relay map ip 150.100.100.5 502
frame-relay map ip 150.100.100.6 502
frame-relay map ip 150.100.100.2 502 broadcast
end
THANKS,
KHALED
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
