Use object tracking iPhone Message Center
On Jul 24, 2012, at 9:09 AM, Maureen Maina <[email protected]> wrote: > Hi All, > Ran into an interesting scenario where I was using a floating static > route > to back up another route .Note however they use the same outgoing > interface. > > ip route 0.0.0.0 0.0.0.0 200.1.1.2 > ip route 0.0.0.0 0.0.0.0 200.1.1.3 15 > ! > > I went on to shut the interface with the ip add 200.1.1.2 expecting > the > 2nd route to kick in.It didnt. Unfortunately static routes are > recursive in > nature and the fact that a connected route to the 200.1.1.0 subnet > remains > in the routing table prevented the failure of my first default route. > Any ideas as to how I can use a default route to 2 diff next-hops > within > the same subnet/link? > Probably tracking:-) > Rgds, > Mo > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
