The ip address in the distance command is the router-id (I do think the command
reference guide could be better there).
My issue is now, can I affect the distance of prefixes I receive from more than
1 neighbor with the same metric, with the distance command so that he admin
distance of the prefixes from 1 of the two neighbors is different? I can't get
it to work.
here is the example I am working with:
Cat2#sh ip route ospf
136.10.0.0/16 is variably subnetted, 19 subnets, 6 masks
O IA 136.10.6.6/32 [110/2] via 136.10.56.6, 00:00:20, Vlan56
O IA 136.10.5.5/32 [110/2] via 136.10.56.5, 00:00:20, Vlan56
O IA 136.10.4.4/32 [110/130] via 136.10.56.6, 00:00:20, Vlan56
[110/130] via 136.10.56.5, 00:00:20, Vlan56
I would like to change the admin distance of 136.10.4.4 to 109 when received by
136.10.56.5 router-id 136.10.5.5
Thanks
fulvio
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
