Here is the config Access list 10 permit 136.10.4.4
Router ospf x Distance 109 136.10.56.5 0.0.0.0 10 Hope this help -----Original Message----- From: Fulvio allegretti <[email protected]> Sender: [email protected] Date: Mon, 15 Oct 2012 16:40:36 To: [email protected]<[email protected]> Subject: [OSL | CCIE_RS] OSPF distance command The ip address in the distance command is the router-id (I do think the command reference guide could be better there). My issue is now, can I affect the distance of prefixes I receive from more than 1 neighbor with the same metric, with the distance command so that he admin distance of the prefixes from 1 of the two neighbors is different? I can't get it to work. here is the example I am working with: Cat2#sh ip route ospf 136.10.0.0/16 is variably subnetted, 19 subnets, 6 masks O IA 136.10.6.6/32 [110/2] via 136.10.56.6, 00:00:20, Vlan56 O IA 136.10.5.5/32 [110/2] via 136.10.56.5, 00:00:20, Vlan56 O IA 136.10.4.4/32 [110/130] via 136.10.56.6, 00:00:20, Vlan56 [110/130] via 136.10.56.5, 00:00:20, Vlan56 I would like to change the admin distance of 136.10.4.4 to 109 when received by 136.10.56.5 router-id 136.10.5.5 Thanks fulvio _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
