Hello, I've been trying to shape ingress traffic for two sub interfaces with a common class-map, so they will have a shared limit. So far unsuccessful... Tried to create a class-map to match a particular Access-list with the IP addresses of both sub interfaces, applied the class-map to policy-map, and tried to apply it to both sub interfaces, I think I need to apply this limit to the outbound interfaces, not to the sub interfaces where the traffic comes inbound.
class-map match-all NET match access-group name NET-ACL policy-map NET class NET police cir 256000000 service-policy output NET --- to sub interface 1/1.240 service-policy output NET --- to sub interface 1/1.241 ip access-list standard NET-ACL permit 10.15.16.0 0.0.0.3 permit 10.15.16.4 0.0.0.3 If there is a possible solution to avoid applying this policy-map to the outbound interface, I'd like to see it. Is there a way to achieve this? Thanks in advance. Regards, Onur Gashi _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
