Hi Onur, What would you exactly like to do with shaping that you can not accomplish with outbound ts?
> Date: Wed, 23 Jan 2013 00:34:36 -0800 > From: [email protected] > To: [email protected] > Subject: [OSL | CCIE_RS] Traffic Shaping > > Hello, > > I've been trying to shape ingress traffic for two sub interfaces with a > common class-map, so they will have a shared limit. So far unsuccessful... > Tried to create a class-map to match a particular Access-list with the IP > addresses of both sub interfaces, applied the class-map to policy-map, and > tried to apply it to both sub interfaces, I think I need to apply this limit > to the outbound interfaces, not to the sub interfaces where the traffic comes > inbound. > > class-map match-all NET > match access-group name NET-ACL > > policy-map NET > class NET > police cir 256000000 > > service-policy output NET --- to sub interface 1/1.240 > service-policy output NET --- to sub interface 1/1.241 > > ip access-list standard NET-ACL > permit 10.15.16.0 0.0.0.3 > permit 10.15.16.4 0.0.0.3 > > If there is a possible solution to avoid applying this policy-map to the > outbound interface, I'd like to see it. > > Is there a way to achieve this? > > > Thanks in advance. > > Regards, > Onur Gashi > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
