What feature set on the switch? You need IP Services for PBR. Bob -- Sent from my iPhone, please excuse any typos.
On Jan 25, 2013, at 3:06 AM, Sheraz Sheraz <[email protected]> wrote: > can someone please help me to figure out the problem? I'm trying to apply > route-map in vlan interface on Cisco 3560G but its not functional neither i > can see it in show running while "sdm prefere routing+reboot" are already > accomplished! please let me know how can i apply route-maps in vlan > interfaces.I;m using both dynamic routing & inter-vlan routing on the unit. > > > show sdm prefer# > > The current template is "desktop routing" template. > The selected template optimizes the resources in > the switch to support this level of features for > 8 routed interfaces and 1024 VLANs. > > number of unicast mac addresses: 3K > number of IPv4 IGMP groups + multicast routes: 1K > number of IPv4 unicast routes: 11K > number of directly-connected IPv4 hosts: 3K > number of indirect IPv4 routes: 8K > number of IPv4 policy based routing aces: 0.5K > number of IPv4/MAC qos aces: 0.5K > number of IPv4/MAC security aces: 1K > > Configuration: > (config)#interface vlanxx > > (config-if)#ip policy route-map vlan-gateway > > > 3560G#Show run | begin interface > > Output: > > interface VlanXX > description XX > ip address XXX.XXX.XXX.XX > ip helper-address XXX.XXX.XXX.XX > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
