Great! but not working for me! :( please suggest any solution! 3560G#sh ip policy Interface Route map
interface Vlanxx Empty, cant see applied route-map :( From: [email protected] Date: Sat, 26 Jan 2013 13:58:21 -0500 Subject: Re: [OSL | CCIE_RS] can someone please help? To: [email protected] CC: [email protected] Working for me: SW3#show verCisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(44)SE6, RELEASE SOFTWARE (fc1) SW3#show sdm prefer The current template is "desktop routing" template. The selected template optimizes the resources in the switch to support this level of features for 8 routed interfaces and 1024 VLANs. number of unicast mac addresses: 3K number of IPv4 IGMP groups + multicast routes: 1K number of IPv4 unicast routes: 11K number of directly-connected IPv4 hosts: 3K number of indirect IPv4 routes: 8K number of IPv4 policy based routing aces: 0.5K number of IPv4/MAC qos aces: 0.75K number of IPv4/MAC security aces: 1K SW3#show access-listExtended IP access list FOO 10 permit tcp any host 10.2.32.45 eq www SW3#show route-map route-map PBR, permit, sequence 10 Match clauses: ip address (access-lists): FOO Set clauses: ip next-hop 10.1.1.22 Policy routing matches: 0 packets, 0 bytes SW3#show ip policyInterface Route mapVlan1 PBR Current configuration : 83 bytes! interface Vlan1 ip address 10.1.1.1 255.255.255.0 ip policy route-map PBR end Tried a ping from R3 to another destination: SW3#deb ip policy*Mar 1 00:30:14.707: IP: s=10.1.1.3 (Vlan1), d=10.23.45.67, len 100, FIB policy rejected(no match) - normal forwarding Then tried a telnet from R3 to the PBR-specified target: SW3#*Mar 1 00:30:29.790: IP: s=10.1.1.3 (Vlan1), d=10.2.32.45, len 44, FIB policy match*Mar 1 00:30:29.790: IP: s=10.1.1.3 (Vlan1), d=10.2.32.45, g=10.1.1.22, len 44, FIB policy routed On Sat, Jan 26, 2013 at 12:40 PM, Sheraz Sheraz <[email protected]> wrote: Any update Bob? one else can help me to figure out this problem? From: [email protected] To: [email protected] CC: [email protected] Subject: RE: [OSL | CCIE_RS] can someone please help? Date: Fri, 25 Jan 2013 20:21:36 +0500 i want to change the default ip next of some addresses. > From: [email protected] > To: [email protected] > Date: Fri, 25 Jan 2013 18:22:31 +0500 > CC: [email protected] > Subject: Re: [OSL | CCIE_RS] can someone please help? > > Yes Bob, i need PBR on vlan interfaces! > > Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(53)SE2, > RELEASE SOFTWARE (fc3) > > > > From: [email protected] > > Date: Fri, 25 Jan 2013 07:53:21 -0500 > > Subject: Re: [OSL | CCIE_RS] can someone please help? > > To: [email protected] > > CC: [email protected] > > > > What feature set on the switch? You need IP Services for PBR. > > > > Bob > > -- > > Sent from my iPhone, please excuse any typos. > > > > On Jan 25, 2013, at 3:06 AM, Sheraz Sheraz <[email protected]> wrote: > > > > > can someone please help me to figure out the problem? I'm trying to apply > > > route-map in vlan interface on Cisco 3560G but its not functional neither > > > i can see it in show running while "sdm prefere routing+reboot" are > > > already accomplished! please let me know how can i apply route-maps in > > > vlan interfaces.I;m using both dynamic routing & inter-vlan routing on > > > the unit. > > > > > > > > > show sdm prefer# > > > > > > The current template is "desktop routing" template. > > > The selected template optimizes the resources in > > > the switch to support this level of features for > > > 8 routed interfaces and 1024 VLANs. > > > > > > number of unicast mac addresses: 3K > > > number of IPv4 IGMP groups + multicast routes: 1K > > > number of IPv4 unicast routes: 11K > > > number of directly-connected IPv4 hosts: 3K > > > number of indirect IPv4 routes: 8K > > > number of IPv4 policy based routing aces: 0.5K > > > number of IPv4/MAC qos aces: 0.5K > > > number of IPv4/MAC security aces: 1K > > > > > > Configuration: > > > (config)#interface vlanxx > > > > > > (config-if)#ip policy route-map vlan-gateway > > > > > > > > > 3560G#Show run | begin interface > > > > > > Output: > > > > > > interface VlanXX > > > description XX > > > ip address XXX.XXX.XXX.XX > > > ip helper-address XXX.XXX.XXX.XX > > > > > > > > > > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab training, please > > > visit www.ipexpert.com > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > > www.PlatinumPlacement.com > > > > > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
