Hi All,
I am just trying to replicate Marko scenario from blog Multicast RPF
Failure: Recovery Using BGP. I have only changed addressing but other
details are the same. I have ipv4 unicast working and Pim enabled.
I have disabled pim between R3 and R4 on Fa interface and I can see RPF
failure. I set up MP-BGP and that is active as well but..command
neighbor x.x.x.x default-originate does not seem to send default route
to the neighbor.
R3
router bgp 34
no bgp default ipv4-unicast
bgp log-neighbor-changes
neighbor 4.4.4.4 remote-as 34
neighbor 4.4.4.4 update-source Loopback0
!
address-family ipv4 multicast
neighbor 4.4.4.4 activate
neighbor 4.4.4.4 default-originate
no auto-summary
R3#show bgp ipv4 multicast neighbors 4.4.4.4 | b def
Default information originate, default not sent
R4
router bgp 34
no bgp default ipv4-unicast
bgp log-neighbor-changes
neighbor 3.3.3.3 remote-as 34
neighbor 3.3.3.3 update-source Loopback0
!
address-family ipv4 multicast
neighbor 3.3.3.3 activate
no auto-summary
no synchronization
exit-address-family
R4#
R4#show bgp ipv4 mul
R4#show bgp ipv4 mul s
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
State/PfxRcd
3.3.3.3 4 34 61 59 3 0 0 00:34:57
0
I guess I misinterpret something. Where is the problem?
THanks,
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
