That is hilarious! On 1/25/13 11:58 PM, "Marko Milivojevic" <[email protected]> wrote:
>You need to arm yourself with patience. When I demonstrate this in the >class, I usually go and get coffee while the router makes up its mind >about advertising the 0.0.0.0/0 :-) > >-- >Marko Milivojevic - CCIE #18427 (SP R&S) >Senior CCIE Instructor / Managing Partner - IPexpert > >:: This message was sent from a mobile device. I apologize for errors and >brevity. :: > >On Jan 25, 2013, at 16:55, Lukasz <[email protected]> wrote: > >> Hi All, >> >> >> I am just trying to replicate Marko scenario from blog Multicast RPF >>Failure: Recovery Using BGP. I have only changed addressing but other >>details are the same. I have ipv4 unicast working and Pim enabled. >> I have disabled pim between R3 and R4 on Fa interface and I can see RPF >>failure. I set up MP-BGP and that is active as well but..command >>neighbor x.x.x.x default-originate does not seem to send default route >>to the neighbor. >> >> >> R3 >> >> router bgp 34 >> no bgp default ipv4-unicast >> bgp log-neighbor-changes >> neighbor 4.4.4.4 remote-as 34 >> neighbor 4.4.4.4 update-source Loopback0 >> ! >> address-family ipv4 multicast >> neighbor 4.4.4.4 activate >> neighbor 4.4.4.4 default-originate >> no auto-summary >> >> >> R3#show bgp ipv4 multicast neighbors 4.4.4.4 | b def >> Default information originate, default not sent >> >> >> R4 >> >> >> router bgp 34 >> no bgp default ipv4-unicast >> bgp log-neighbor-changes >> neighbor 3.3.3.3 remote-as 34 >> neighbor 3.3.3.3 update-source Loopback0 >> ! >> address-family ipv4 multicast >> neighbor 3.3.3.3 activate >> no auto-summary >> no synchronization >> exit-address-family >> R4# >> R4#show bgp ipv4 mul >> >> >> R4#show bgp ipv4 mul s >> Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down >>State/PfxRcd >> 3.3.3.3 4 34 61 59 3 0 0 00:34:57 >> 0 >> >> >> I guess I misinterpret something. Where is the problem? >> >> >> THanks, >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, >>please visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >>www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >_______________________________________________ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com > >http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
