You need to arm yourself with patience.  When I demonstrate this in the class, 
I usually go and get coffee while the router makes up its mind about 
advertising the 0.0.0.0/0 :-)

--
Marko Milivojevic - CCIE #18427 (SP R&S)
Senior CCIE Instructor / Managing Partner - IPexpert

:: This message was sent from a mobile device. I apologize for errors and 
brevity. ::

On Jan 25, 2013, at 16:55, Lukasz <[email protected]> wrote:

> Hi All,
> 
> 
> I am just trying to replicate Marko scenario from blog Multicast RPF Failure: 
> Recovery Using BGP. I have only changed addressing but other details are the 
> same. I have ipv4 unicast working and Pim enabled.
> I have disabled pim between R3 and R4 on Fa interface and I can see RPF 
> failure. I set up MP-BGP and that is active as well but..command neighbor 
> x.x.x.x default-originate does not seem to send default route to the neighbor.
> 
> 
> R3
> 
> router bgp 34
> no bgp default ipv4-unicast
> bgp log-neighbor-changes
> neighbor 4.4.4.4 remote-as 34
> neighbor 4.4.4.4 update-source Loopback0
> !
> address-family ipv4 multicast
>  neighbor 4.4.4.4 activate
>  neighbor 4.4.4.4 default-originate
>  no auto-summary
> 
> 
> R3#show bgp ipv4 multicast neighbors 4.4.4.4 | b def
>  Default information originate, default not sent
> 
> 
> R4
> 
> 
> router bgp 34
> no bgp default ipv4-unicast
> bgp log-neighbor-changes
> neighbor 3.3.3.3 remote-as 34
> neighbor 3.3.3.3 update-source Loopback0
> !
> address-family ipv4 multicast
>  neighbor 3.3.3.3 activate
>  no auto-summary
>  no synchronization
> exit-address-family
> R4#
> R4#show bgp ipv4 mul
> 
> 
> R4#show bgp ipv4 mul s
> Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  
> State/PfxRcd
> 3.3.3.3         4    34      61      59        3    0    0 00:34:57       0
> 
> 
> I guess I misinterpret something. Where is the problem?
> 
> 
> THanks,
> 
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
> 
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to