Thank you, after setting up length to 512 or 0 on switches and router I can see the entire config.
Thank you. Regards, Chet ________________________________ From: Marcos Hiroshi Umino <[email protected]> To: Chetan Thakkar <[email protected]> Cc: "[email protected]" <[email protected]> Sent: Saturday, March 9, 2013 12:37 PM Subject: Re: [OSL | CCIE_RS] When I telnet to Switches - cannot see entire configuration I saw it in cyclades. Your console should be vt100. Try for a test - do term len 0, sh run and any command that pages will be complete. Also, you may notice some issues with return key. Try ctrl-j. In the old cyclades I couldn't get it to work with vt100. Had to use some weird "socket" serial, which doesn't send correct keystrokes and receives weird telnet commands. --- Marcos Hiroshi Umino (mobile) Le 09/03/2013 à 13:37, Chetan Thakkar <[email protected]> a écrit : > Guys, > > Need some help, when I try to give command - sh run > > connected through Access swicth 2511 to Switches and routers I can only see > only few lines on configuration. > > Configuration on Access Sw > Line Vty 0 4 > login > transport input all > transport output all > > Config on Switches > > line vty 0 4 > login > > > > Telnet from my laptop to Access Switch and then telnet to Lab Switches and > Router > > Eg of output - > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
