WB3-Lab9
--------
Task: L2VPN
------

I am running this on GNS, I have the AToM properly configured and
functional.

BUT I get Inconsistency messege on Cat1 & Cat3

Any suggestion on over-riding this inconsistency?




The following are the outputs of show commands:




On R2
-----

R2#sh mpls l2transport vc

Local intf     Local circuit              Dest address    VC ID      Status
-------------  -------------------------- --------------- ----------
----------
Fa0/0.211      Eth VLAN 211               70.18.115.5     25         UP


On R5
------

R5#sh mpls l2transport vc

Local intf     Local circuit              Dest address    VC ID      Status
-------------  -------------------------- --------------- ----------
----------
Fa0/1.52       Eth VLAN 52                70.18.115.2     25         UP





BUT I get Inconsistency messege on Cat1 & Cat3
--------------------------------------------------


On Cat1
-------

Cat1(config)# PVST+:Inconsistency timer expired. inconsistency 2
                 cleared for FastEthernet1/2

*Mar  1 01:44:56.119: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with
inconsistent peer vlan id 52 on FastEthernet1/2 VLAN211.
*Mar  1 01:44:56.119: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking
FastEthernet1/2 on VLAN211. Inconsistent local vlan.



Cat1#sh spanning-tree inconsistentports

Name                 Interface            Inconsistency
-------------------- -------------------- ------------------
VLAN211              FastEthernet1/2      Port VLAN ID Mismatch

Number of inconsistent ports (segments) in the system : 1

On Cat3
-------

[OK]
Cat3#
*Mar  1 01:44:49.487: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with
inconsistent peer vlan id 211 on FastEthernet1/5 VLAN52.
*Mar  1 01:44:49.487: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking
FastEthernet1/5 on VLAN52. Inconsistent local vlan.


Cat3#sh spanning-tree inconsistentports

Name                 Interface            Inconsistency
-------------------- -------------------- ------------------
VLAN52               FastEthernet1/5      Port VLAN ID Mismatch

Number of inconsistent ports (segments) in the system : 1

Best Regards,

Saleh Hassan Batouq
[email protected]
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to