Does this have anything to do with VLAN211 being in MST instance 0 and VLAN52 
in MST instance 1?

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Marko Milivojevic
Sent: Tuesday, September 03, 2013 3:15 PM
To: [email protected]
Cc: OSL Routing and Switching
Subject: Re: [OSL | CCIE_RS] WB3-Lab9-L2VPN Task

Again, this is not related to AToM :-)


On Tue, Sep 3, 2013 at 1:14 PM, <[email protected]> wrote:

> **
> The only thing I can think of problems connected to the STP with 
> mismatching vlans in VLAN CONNECT MODE.
> If I am not mistake there are 2 kind of VC type:  port-mode or 
> VLAN-mode for Ethernet L2VPNs.
> A PortMode  will replicate all Ethernet frames received, including all 
> tagged frames.
> Perhaps in port mode we have not the problem about mismatching vlan
>
> In VLAN-based mode  we will have xconnect statement will be under a 
> sub-interface with own encapsulation and VLAN number specified.
> This mode will just forward the own VLAN frames through pseudowire.
>
> However I think to replicate this problem.
>
>
> On Tue, Sep 3, 2013, at 10:04 PM, Marko Milivojevic wrote:
>
> Sure, but that will open the network for the loops.
>
> Try to focus on what the problem is, not how to get rid of the symptom 
> :-)
>
> --
> Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor / 
> Managing Partner - IPexpert
>
>
> On Tue, Sep 3, 2013 at 1:02 PM, <[email protected]> wrote:
>
>
> **
> There are other solution for example vlan filter, also L2 protocol 
> tunnel which erase local bpdu processing.
>
>
>
>
> On Tue, Sep 3, 2013, at 09:57 PM, [email protected] wrote:
>
> I am thinking we filtering bpdu to stop bpdu from blocking 
> inconsistent vlan,bpdu filtering is acceptable for me.
>
> What did you think?
>
>
>
> On Tue, Sep 3, 2013, at 08:17 PM, Marko Milivojevic wrote:
>
> You're getting close.
>
>
> Respond to the list, please, as it may be interesting for the others 
> to see, as well.
>
> --
> Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor / 
> Managing Partner - IPexpert
>
>
> On Tue, Sep 3, 2013 at 11:16 AM, <[email protected]> wrote:
>
>
> **
> In fact I did not think it is related to l2vpn, althhough I  do not 
> know different vlan to VC however I am thinking is related config to 
> port or mode spanning tree, I will check conifguration to end point 
> port: if 802.1q to two side and native vlans, or model of stp EEE 
> 802.1D and pvst+
>
>
> On Tue, Sep 3, 2013, at 07:32 PM, Marko Milivojevic wrote:
>
> That is all very correct, but that's not the cause of the error. You 
> *can* have different VLAN IDs on two ends of the VC, but then you need 
> to make sure something else is done. Something that causes this problem.
>
> Btw. it's not related to L2VPNs :-)
>
> --
> Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor / 
> Managing Partner - IPexpert
>
>
> On Tue, Sep 3, 2013 at 9:45 AM, <[email protected]> wrote:
>
> Point-to-Point L2 VPNs L2 connectivity to the attached, that make  
> circuits of two separate sites connected across a packet network  
> Furthemore It provide connectivity transparent without need L2  
> connection acrosss SP core
>
>  In the speficic:
>
>  The VC identifiers at each end must match, so that the connection is  
> uniquely  addressed and MTU settings for the interfaces would have the 
> same
>
>  In mpls the topmost label is the transport label for the  other end's 
> 1321P address and the second label identifies the remote AC
>
>  Your error usually mean you receveid bpdu tagged with vlan id that  
> does't match vlan id where bpdu was receveid  In the meantime make 
> sure native vlan is consistent on both ends of a  802.1Q trunk and 
> your vtp switches setup  like VTP mode and domain names
>
>  I hope it help you.
>
>
>
>
>
>  On Tue, Sep 3, 2013, at 06:00 PM, Marko Milivojevic wrote:
>  > Without straight-out giving you an answer (tell me if you want 
> that),  > let's  > try to understand the problem first…  >  > What do 
> you think is causing this inconsistency?
>  >
>  > --
>  > Marko Milivojevic - CCIE #18427 (SP R&S)  > Senior CCIE Instructor 
> / Managing Partner - IPexpert  >  >  > On Tue, Sep 3, 2013 at 8:36 AM, 
> Saleh Batouq <[email protected]>  > wrote:
>  >
>  > > WB3-Lab9
>  > > --------
>  > > Task: L2VPN
>  > > ------
>  > >
>  > >
>  > > I am running this on GNS, I have the AToM properly configured and  
> > > functional.
>  > >
>  > > BUT I get Inconsistency messege on Cat1 & Cat3  > >  > > Any 
> suggestion on over-riding this inconsistency?
>  > >
>  > >
>  > >
>  > >
>  > > The following are the outputs of show commands:
>  > >
>  > >
>  > >
>  > >
>  > > On R2
>  > > -----
>  > >
>  > > R2#sh mpls l2transport vc
>  > >
>  > > Local intf     Local circuit              Dest address    VC ID
>  Status
>  > > -------------  -------------------------- --------------- 
> ----------  > > ----------
>  > > Fa0/0.211      Eth VLAN 211               70.18.115.5     25
> UP
>  > >
>  > >
>  > > On R5
>  > > ------
>  > >
>  > > R5#sh mpls l2transport vc
>  > >
>  > > Local intf     Local circuit              Dest address    VC ID
>  Status
>  > > -------------  -------------------------- --------------- 
> ----------  > > ----------
>  > > Fa0/1.52       Eth VLAN 52                70.18.115.2     25
> UP
>  > >
>  > >
>  > >
>  > >
>  > >
>  > > BUT I get Inconsistency messege on Cat1 & Cat3  > > 
> --------------------------------------------------
>  > >
>  > >
>  > > On Cat1
>  > > -------
>  > >
>  > > Cat1(config)# PVST+:Inconsistency timer expired. inconsistency 2
>  > >                  cleared for FastEthernet1/2
>  > >
>  > > *Mar  1 01:44:56.119: %SPANTREE-2-RECV_PVID_ERR: Received BPDU 
> with  > > inconsistent peer vlan id 52 on FastEthernet1/2 VLAN211.
>  > > *Mar  1 01:44:56.119: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking  > > 
> FastEthernet1/2 on VLAN211. Inconsistent local vlan.
>  > >
>  > >
>  > >
>  > > Cat1#sh spanning-tree inconsistentports  > >
>  > > Name                 Interface            Inconsistency
>  > > -------------------- -------------------- ------------------
>  > > VLAN211              FastEthernet1/2      Port VLAN ID Mismatch
>  > >
>  > > Number of inconsistent ports (segments) in the system : 1  > >  > 
> > On Cat3  > > -------  > >  > > [OK]  > > Cat3#  > > *Mar  1 
> 01:44:49.487: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with  > > 
> inconsistent peer vlan id 211 on FastEthernet1/5 VLAN52.
>  > > *Mar  1 01:44:49.487: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking  > > 
> FastEthernet1/5 on VLAN52. Inconsistent local vlan.
>  > >
>  > >
>  > > Cat3#sh spanning-tree inconsistentports  > >
>  > > Name                 Interface            Inconsistency
>  > > -------------------- -------------------- ------------------
>  > > VLAN52               FastEthernet1/5      Port VLAN ID Mismatch
>  > >
>  > > Number of inconsistent ports (segments) in the system : 1  > >  > 
> > Best Regards,  > >  > > Saleh Hassan Batouq  > > 
> [email protected]  > > 
> _______________________________________________
>  > > For more information regarding industry leading CCIE Lab 
> training, please  > > visit www.ipexpert.com  > >  > > Are you a CCNP 
> or CCIE and looking for a job? Check out  > > 
> www.PlatinumPlacement.com  > >  > > 
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>  > >
>  > _______________________________________________
>  > For more information regarding industry leading CCIE Lab training, 
> please  > visit www.ipexpert.com  >  > Are you a CCNP or CCIE and 
> looking for a job? Check out  > www.PlatinumPlacement.com  >  > 
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>
>
>  --
>  This message is intended for the individual(s) to whom it is 
> addressed  and may contain information that is privileged or confidential.
>  If you are not the addressee you must not read,use or disclose the  
> contents of this email.
>  Whilst all reasonable care has been taken to avoid the transmission 
> of  viruses, the recipient should carry out virus and other checks,  
> as they consider appropriate.
>  Myself accepts no responsibility in this regard.
> _______________________________________________
>  For more information regarding industry leading CCIE Lab training, 
> please visit www.ipexpert.com
>
>  Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
>
>  http://onlinestudylist.com/mailman/listinfo/ccie_rs
>
>
>
>
> --
> This message is intended for the individual(s) to whom it is addressed 
> and may contain information that is privileged or confidential.
> If you are not the addressee you must not read,use or disclose the 
> contents of this email.
> Whilst all reasonable care has been taken to avoid the transmission of 
> viruses, the recipient should carry out virus and other checks, as 
> they consider appropriate.
> Myself accepts no responsibility in this regard.
>
>
>
>
>
>
> --
> This message is intended for the individual(s) to whom it is addressed 
> and may contain information that is privileged or confidential.
> If you are not the addressee you must not read,use or disclose the 
> contents of this email.
> Whilst all reasonable care has been taken to avoid the transmission of 
> viruses, the recipient should carry out virus and other checks, as 
> they consider appropriate.
> Myself accepts no responsibility in this regard.
>
>
>
>
> --
> This message is intended for the individual(s) to whom it is addressed 
> and may contain information that is privileged or confidential.
> If you are not the addressee you must not read,use or disclose the 
> contents of this email.
> Whilst all reasonable care has been taken to avoid the transmission of 
> viruses, the recipient should carry out virus and other checks, as 
> they consider appropriate.
> Myself accepts no responsibility in this regard.
>
>
>
>
>
>
> --
> This message is intended for the individual(s) to whom it is addressed 
> and may contain information that is privileged or confidential.
> If you are not the addressee you must not read,use or disclose the 
> contents of this email.
> Whilst all reasonable care has been taken to avoid the transmission of 
> viruses, the recipient should carry out virus and other checks, as 
> they consider appropriate.
> Myself accepts no responsibility in this regard.
>
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anheuser-Busch InBev Email Disclaimer www.ab-inbev.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to