Again, if you are using CoPP (applying the service policy to the control plane) then you would use police rate.
Try not to over think the answer. If the question says to limit to 75k then just use police. If they say to limit with specific burst values to conforming and exceeding values, use police cir. It definately matters if you use police or police rate. I'm pretty sure that if you use police rate in the PM and then try to apply it to an interface you will get an error. V/r, Ryan Krcelic On Wed, Oct 16, 2013 at 12:39 PM, Joe Schulte <[email protected]> wrote: > Okay, but I gave you the exact specs. Limit it to 750k. End of > requirement. > > Police, police rate, or doesn't matter? > > Sent from my iPhone > > On Oct 16, 2013, at 11:19 AM, Ryan Krcelic <[email protected]> wrote: > > The biggest thing to know is that the police rate command is used with > CoPP. If you are just policing you have to choose between 1 bucket or 2 > bucket. Police xxx is 1 bucket and police cir xxx is 2 bucket. > > If you are doing a police statement that is going into a service policy > that will be applied to an interface, use either police or police rate > depending on the throughput and the be/bc values. > V/r, > > Ryan Krcelic > > > > On Wed, Oct 16, 2013 at 11:53 AM, Joe S <[email protected]> wrote: > >> Gaah....class-map match-any FTP >> >> Nobody needs to correct me on that part! >> >> >> On Wed, Oct 16, 2013 at 10:50 AM, Joe S <[email protected]> wrote: >> >> > I appreciate the feedback, and if I'd asked my question more clearly >> maybe >> > it would have been a bit better. >> > >> > The only stipulation in the lab was "Limit FTP traffic to 750Kbps". >> > >> > So in my answer I just did: >> > class-map FTP >> > match protocol secure-ftp >> > match protocol ftp >> > policy-map LIMIT >> > class FTP >> > police 750000 >> > >> > Meanwhile, the book solution was the exact same thing except their >> police >> > statement was: >> > police rate 750000 >> > >> > It's a difficult set of stuff to search for, too, because a word like >> > "rate" tends to show up on all the same pages as "police" anyway... >> > >> > >> > On Wed, Oct 16, 2013 at 10:45 AM, Tony Singh <[email protected] >> >wrote: >> > >> >> >> >> Joe >> >> >> >> Here's some of my notes, read the RFC's below for a deeper >> understanding. >> >> >> >> Single Rate Two Color Policer (One Bucket) >> >> >> >> police 96 bc x be x >> >> confirm action >> >> exced action >> >> >> >> >> >> Single Rate Three Color Policer (Two Buckets) [srTCM RFC 2697] >> >> >> >> police cir x bc x be x >> >> confirm action >> >> exceed action >> >> violate action >> >> >> >> >> >> Two Rate Three Color Policer (Two Buckets) [trTCM RFC 2698] >> >> >> >> Here you define CIR and PIR >> >> >> >> police rate (cir) x (pir) x >> >> confirm action >> >> exceed action >> >> violate action >> >> >> >> The buckets by definition are either conform=one and conform and >> >> violate=two >> >> >> >> -- >> >> BR >> >> >> >> Tony >> >> >> >> Sent from my iPhone on 3 >> >> >> >> > On 16 Oct 2013, at 15:38, Joe S <[email protected]> wrote: >> >> > >> >> > As I continue through I find another difference between my solution >> and >> >> the >> >> > DSG's solution. And I'm having trouble finding an answer online. >> >> > >> >> > In a policy map, what is the difference between a "police" command >> and a >> >> > "police rate" command? >> >> > _______________________________________________ >> >> > For more information regarding industry leading CCIE Lab training, >> >> please visit www.ipexpert.com >> >> > >> >> > Are you a CCNP or CCIE and looking for a job? Check out >> >> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> >> > >> >> > http://onlinestudylist.com/mailman/listinfo/ccie_rs >> >> >> > >> > >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
