You can look at a table on page 33 of the QOS SRND for this information. Vik Malhi CCIE Voice Instructor / Developer - IPexpert, Inc. CCIE Voice #13890 CCSI #31584 URL: http://www.IPexpert.com <http://www.ipexpert.com/> Toll Free: +1.866.225.8064 International: +1.810.326.1444
_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of jason sung Sent: Thursday, February 14, 2008 9:47 AM To: boonchin .ng Cc: CCIE Maillist Subject: Re: [OSL | CCIE_Voice] QoS question G729 on frame-relay with FR.12 is not 24K it is 28K so your 5 g729 calls will be 5 x 28 = 140 On Thu, Feb 14, 2008 at 11:36 AM, boonchin .ng <[EMAIL PROTECTED]> wrote: Hi Jason, Thanks for the explanation. So, I would like to understand another scenario. Similarly, I have a 384K frame-relay WAN link, so I have: ! map-class frame-relay FRTS-384 frame-relay cir 364800 frame-relay bc 3648 frame-ralay be 0 frame-relay mincir 364800 frame-relay fragment 480 ! Now, for LLQ I want to configure to only prioritized 5 g729 calls: ! policy-map LLQ class media priority x class control bandwidth 16 class class-default fair-queue ! So, the x value is 5 g729 calls. How can I calculate the x value? Based on CCM bandwidth for a g729? x = 5 x 24 Please kindly advice. Thanks. ---------- Forwarded message ---------- From: jason sung <[EMAIL PROTECTED]> Date: Thu, Feb 14, 2008 at 11:26 PM Subject: Re: [OSL | CCIE_Voice] QoS question To: "boonchin .ng" <[EMAIL PROTECTED]> Cc: CCIE Maillist <ccie_voice@onlinestudylist.com> When you have minCIR configured the LLQ picks 33% of that. If you do not have minCIR configured than the CIR divided by two is used in the calculation. In your example, since you have mincir configured. Priority bandwidth will be 364800 * .33 = about 120K LLQ will allow you to configure 75% of the total bandwidth. if you want to alter this, use the command max-reserved bandwidth xxx -Jason On Thu, Feb 14, 2008 at 5:45 AM, boonchin .ng <[EMAIL PROTECTED]> wrote: Hi, I have a 384K frame-relay link. Hence, I have: ! map-class frame-relay FRTS-384 frame-relay cir 364800 frame-relay bc 3648 frame-ralay be 0 frame-relay mincir 364800 frame-relay fragment 480 ! Now, I want to do LLQ on voice, so: ! policy-map LLQ class media priority percent 33 class control bandwidth percent 5 class class-default fair-queue ! Question: In the policy-map LLQ, I have "bandwidth percent 5". So can I assume that is 5% of the CIR value? If I want to use "priority x" and "bandwidth y" without using the percent command, how I can calculate the bandwidth value for class media and class control? Thanks.