Oh yeah, forgot this on the 6500: set vlan y/z 2x0 - where y/z is the port connected to your call manager
--- Jacob Owen <[EMAIL PROTECTED]> wrote: > All I ever do when I start is the following config > on > the HQ Router and 6500: > > HQ > int f0/0.2X0 > encapsulation dot1q 2x0 > ip address 10.x.200.3 255.255.255.0 > ! > int f0/0 > no shut > > 6500 > set trunk x/y on dot1q > > That's it, never had an issue with native vlans as 1 > is normally chosen. If the lab requires the data > vlan > I just add the sub-interface on the HQ router, no > changes needed on the 6500 as I allow all trunks. > May > not be "ideal" in real world applications but it's > fast and easy to setup. > > --- Vik Ahuja <[EMAIL PROTECTED]> wrote: > > > You also need to make sure you've create your > > sub-interfaces on the HQ router, one for data > > defining your native VLAN and one for voice with > the > > correct IP addressing scheme. You'll also need to > > trunk these interfaces back to the 6k core, making > > sure to also define the native vlan on the correct > > port there. > > > > HTH. > > > > > > > > "Gierula, Christopher E" > > <[EMAIL PROTECTED]> wrote: > > Your auxiliaryvlan should be your voice vlan > > (220). > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On > > Behalf Of Paul and > > Bobs > > Sent: Wednesday, April 09, 2008 6:20 PM > > To: Devildoc > > Cc: ccie_voice@onlinestudylist.com > > Subject: [OSL | CCIE_Voice] First attempt at > > IPEXPERT lab > > > > Hi guys > > > > Not sure if i am missing something here. I have > > basic config applied. I > > am in POD 12 and have > > > > 2/7-9 = IP phones and ATA > > 2/10 HQ-RTR > > 2/11 = CCM (Pub,Sub and Unity) > > > > 6608 > > set port enable 2/7-11 > > set vlan 120 2/7-9 > > set vlan 220 2/10-11 > > set port auxiliaryvlan 2/7-9 120 > > set trunk 2/10 on dot1q 120,220 > > set trunk 2/11 off dot1q 1-4094 > > > > HQ-RTR > > interface f0/0 > > no shut > > > > interface fa0/0.220 > > encapsulation dot1q 220 > > ip address 10.2.200.3 255.255.255.0 > > no shut > > > > > > I can ping from BR1-RTR to 10.2.200.3 but not to > my > > Call Managers. > > Not sure if I am missing something on the CATOS. > > > > Paul > > > > > > > > > > Sincerely, > > Vik Ahuja > > Systems Engineer > > Nexus IS, inc. > > CCIE # 11958 (Security) CISSP, CCNP > > Cell : 510-304-9423 > > Email: [EMAIL PROTECTED] > > > > > Jacob Owen > CCIE #14063 (R&S, Service Provider), CCVP, CCDP > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam > protection around > http://mail.yahoo.com > Jacob Owen CCIE #14063 (R&S, Service Provider), CCVP, CCDP __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
