What's the router config for SCCP look like and how did you configure the Callmanager for each resource?
Kevin Porter Systems Engineer L4 Netelligent Corporation 400 South Woods Mill Drive, Suite 105 St. Louis, MO 63017 Office: (314) 392-6921 Cell: (314) 852-1252 Fax: (314) 392-9760 [EMAIL PROTECTED] www.netelligent.com Bridging The Gap Between Good and GREAT IP Communications! ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Onur Tufekci Sent: Saturday, June 14, 2008 11:20 AM To: OSL CCIE Voice Lab Exam Subject: Re: [OSL | CCIE_Voice] HW resources on gateway I try to register the router resorces with a MAC address and CallManager does not like using one MAC for Transcode & Conf . I bind the sccp to Voice Vlan interface so there is only one MAC address available. I can register the gateway as IOS resource no problem for both the transcoder and ConfB. On Sat, Jun 14, 2008 at 11:13 AM, Kevin Porter <[EMAIL PROTECTED]> wrote: Absolutely! Kevin Porter Systems Engineer L4 Netelligent Corporation 400 South Woods Mill Drive, Suite 105 St. Louis, MO 63017 Office: (314) 392-6921 Cell: (314) 852-1252 Fax: (314) 392-9760 [EMAIL PROTECTED] www.netelligent.com <http://www.netelligent.com/> Bridging The Gap Between Good and GREAT IP Communications! -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Onur Tufekci Sent: Saturday, June 14, 2008 10:11 AM To: <ccie_voice@onlinestudylist.com> <ccie_voice@onlinestudylist.com> Subject: [OSL | CCIE_Voice] HW resources on gateway Is it possible to register a router as HW conf and trans resource at the same time to the same callmanager?