Yes, that's the only way i could make it work, an unassigned number to a cti-rp XXXX forwarded to unity/call handler.
Regards//r.a. On Mon, Jun 30, 2008 at 9:10 AM, Ovais Iqbal <[EMAIL PROTECTED]> wrote: > There is no such solution as of yet using the CCM Annunciator, you need to > use unity call handler to do this job, you will be just fine to get the > marks. I don't know who started this annunciator rumour. > > Ovais Iqbal > 416-294-7869 > Sent from my BlackBerry device > > ------------------------------ > *From*: "Ricardo Arevalo" <[EMAIL PROTECTED]> > *Date*: Mon, 30 Jun 2008 08:47:11 -0400 > *To*: <ccie_voice@onlinestudylist.com> > *Subject*: Re: [OSL | CCIE_Voice] Annunciator to external callers > Hi all, > > Is there any way to keep an incoming call from PSTN to an unassigned > number, long enough to play it the annunciator message before it is > disconnected? > The target is to play the ann-vca message: "your call cannot be completed > as dialed...." to external callers. > > I'm stuck on this. > > Brgds//r.a. > > > On Sat, Jun 28, 2008 at 5:38 PM, Ricardo Arevalo < > [EMAIL PROTECTED]> wrote: > >> I tried already, but somehow the CCM keeps the source of the call. Trying >> through a translation pattern i can make the call to be routed but the >> result is the same, calls originated from ip phones receive the expected >> treatment, but the calls incoming from pstn or gateway, the result is the >> same if i use either a CTI-RP or translation pattern. >> >> I think it should be any parameter different from those kind of calls. >> >> I even tried to define the gateway as on-net, but no change, it is always >> fast busy! >> >> any other suggestion? i ran out of ideas! >> >> //r.a. >> >> >> >> >> On Sat, Jun 28, 2008 at 4:49 PM, Mehmet Tufekci <[EMAIL PROTECTED]> >> wrote: >> >>> You can create a translation pattern for all unkown numbers say you are >>> using 4 digit extension then your translation pattern will be or route >>> pattern XXXX so any match you can play the same greeting. >>> >>> >>> On Jun 28, 2008, at 3:37 PM, Ricardo Arevalo wrote: >>> >>> Ok, >>> >>> The problem is that the default answer sent to external callers on >>> unassigned number condition is a fast busy. and i want them to listen: "your >>> call cannot be completed as dialed, bla, bla, bla". If i call to any >>> unassigned number from any internal user i can listen it but that is not the >>> case if the call comes from a gateway/pstn. >>> >>> Thanks >>> >>> //r.a. >>> >>> On Sat, Jun 28, 2008 at 3:17 PM, Mehmet Tufekci <[EMAIL PROTECTED]> >>> wrote: >>> >>>> You can change the wav file in the TFTP folder in CCM. You need to >>>> record a new one. >>>> >>>> >>>> >>>> On Jun 28, 2008, at 2:42 PM, Ricardo Arevalo wrote: >>>> >>>> Hi, I need help on this: >>>>> >>>>> How can i do to get external callers to get an error mesagge >>>>> (annunciator) when calling to internal unassigned number instead of just a >>>>> fast busy? >>>>> >>>>> thnks >>>>> >>>>> //r.a. >>>>> >>>>> >>>> >>> >>> >> >