It was my understanding that Conference Bridges required "whole" DSPs
and could not be shared. As you have already reserved some of the
DSP resources to PSTN termination, the left over DSP resources cannot
be now allocated to ConfB, this rule does nto apply to transcoders.
taken from the SRND:
DSPs that are configured through Cisco IOS as conference resources
will load firmware into the DSPs that is specific to conferencing
functionality only, and these DSPs cannot be used for any other media
feature.
link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/5x/50media.html#wp1087989
Cheers,
Mike
On 07/07/2008, at 1:23 PM, Vik Malhi wrote:
try configuring sccp ccm and sccp ccm group before you set the max
sessions.
Vik Malhi – CCIE #13890
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: [EMAIL PROTECTED]
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-
On-Demand and Audio Certification Training Tools for the Cisco CCIE
R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice
Lab and CCIE Storage Lab Certifications.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
] On Behalf Of Mehmet Tufekci
Sent: Sunday, July 06, 2008 9:17 AM
To: ccievoice1
Cc: OSL CCIE Voice Lab Exam
Subject: Re: [OSL | CCIE_Voice] 0 Conf max sessions
I have 1-3 configured under controller.
I am able to see 1-8 available resources under my transcoder profile
but no luck with conference. I know conference will not show up if
you enable transcoder profile first. No matter what I tried I can
not get it to run.
On Jul 6, 2008, at 11:44 AM, ccievoice1 wrote:
have you utilized all the dsp resources for your pri-group?
On Sun, Jul 6, 2008 at 11:31 PM, Mehmet Tufekci <[EMAIL PROTECTED]
> wrote:
Hi All,
I can not figure out why maximum session <0-0> is showing under
conference profile.
I did not enable transcoding profile yet.
voice-card 0
dspfarm
dsp services dspfarm
!
!
!
interface Loopback0
ip address 172.3.102.1 255.255.255.255
ip ospf network point-to-point
!
!
sccp local Loopback0
sccp
!
dspfarm profile 1 transcode
codec g711ulaw
codec g729r8
shutdown
!
dspfarm profile 2 conference
codec g711ulaw
codec g729r8
shutdown
!
