Here is the configuration and results: router2(config)#do show run Building configuration... Current configuration : 2938 bytes ! ! Last configuration change at 15:11:09 UTC Mon Jul 7 2008 ! NVRAM config last updated at 14:49:04 UTC Mon Jul 7 2008 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname router2 ! boot-start-marker boot-end-marker ! card type t1 0 0 no logging console enable secret 5 $1$7cJ4$U9gWuPCv.H1DPdXYIyWJD0 ! no aaa new-model ! resource policy ! network-clock-participate wic 0 ! ! ip cef ! ! no ip domain lookup ! isdn switch-type primary-ni ! voice-card 0 dspfarm dsp services dspfarm ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! controller T1 0/0/0 framing esf linecode b8zs ! controller T1 0/0/1 framing esf linecode b8zs ! ! ! ! interface FastEthernet0/0 ip address 192.168.2.1 255.255.255.0 duplex full speed 100 h323-gateway voip bind srcaddr 192.168.2.1 ! interface FastEthernet0/1 description Management_IP ip address 192.168.10.2 255.255.255.0 duplex full speed 100 ! interface Service-Engine1/0 no ip address shutdown ! ip route 192.168.1.0 255.255.255.0 192.168.10.1 ip route 192.168.3.0 255.255.255.0 192.168.10.3 ! ip http server no ip http secure-server ! ! ! ! control-plane ! ! ! ! ! sccp local FastEthernet0/0 sccp ccm 192.168.2.1 identifier 1 sccp ! sccp ccm group 1 associate ccm 1 priority 1 associate profile 2 register xcoder associate profile 1 register conference ! dspfarm profile 2 transcode codec g711ulaw codec g729r8 maximum sessions 4 associate application SCCP shutdown ! dspfarm profile 1 conference codec g711ulaw codec g729r8 maximum sessions 1 associate application SCCP shutdown ! ! dial-peer voice 1000 voip answer-address 1... destination-pattern 1... session target ipv4:192.168.1.1 codec g711ulaw ! dial-peer voice 9 pots destination-pattern 9T incoming called-number 14345552... direct-inward-dial ! ! ! telephony-service max-ephones 2 max-dn 2 ip source-address 192.168.2.1 port 2000 auto assign 1 to 2 system message Your current options sdspfarm units 5 sdspfarm tag 1 xcoder sdspfarm tag 2 conference dialplan-pattern 1 14345552... extension-length 4 max-conferences 8 gain -6 call-forward pattern .T web admin system name cisco password cisco dn-webedit time-webedit transfer-system full-consult transfer-pattern .T secondary-dialtone 9 ! ! ephone-dn 1 dual-line number 2001 description 14345552001 name Gil Grissom ! !
router2(config)#dspfarm router2(config)# router2(config)# router2(config)# router2(config)#dspfarm pro 2 router2(config-dspfarm-profile)#no shut router2(config-dspfarm-profile)#dspfarm pro 1 router2(config-dspfarm-profile)#no shut Enabling profile failed due to insufficient CONFERENCING resources, resources available to support 0 sessions; please modify the configuration and retry router2(config-dspfarm-profile)#do show inv NAME: "2811 chassis", DESCR: "2811 chassis" PID: CISCO2811 , VID: V03 , SN: FHK103671CU NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1" PID: VWIC2-2MFT-T1/E1 , VID: V01 , SN: FOC102540TY NAME: "PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with one DSP" PID: PVDM2-16 , VID: V01 , SN: FOC1032054R NAME: "NM-SE on Slot 1", DESCR: "NM-SE" PID: NM-CUE , VID: V03, SN: FOC10120B2E NAME: "40GB IDE Disc Daughter Card on Slot 1 SubSlot 0", DESCR: "40GB IDE Disc Daughter Card" PID: , VID: 1.0, SN: FOC10170V2B On Mon, Jul 7, 2008 at 9:14 AM, Onur Tufekci <[EMAIL PROTECTED]> wrote: > I actually configured all that right after I send this message but no luck. > > > On Sun, Jul 6, 2008 at 11:23 PM, Vik Malhi <[EMAIL PROTECTED]> wrote: > >> try configuring sccp ccm and sccp ccm group before you set the max >> sessions. >> >> >> Vik Malhi – CCIE #13890 >> Senior Technical Instructor - IPexpert, Inc. >> >> Telephone: +1.810.326.1444 >> Fax: +1.810.454.0130 >> Mailto: [EMAIL PROTECTED] <[EMAIL PROTECTED]> >> >> Join our free online support and peer group communities: >> http://www.IPexpert.com/communities <http://www.ipexpert.com/communities> >> >> IPexpert - The Global Leader in Self-Study, Classroom-Based, >> Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE >> R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and >> CCIE Storage Lab Certifications. >> >> >> ------------------------------ >> *From:* [EMAIL PROTECTED] [mailto: >> [EMAIL PROTECTED] *On Behalf Of *Mehmet Tufekci >> *Sent:* Sunday, July 06, 2008 9:17 AM >> *To:* ccievoice1 >> *Cc:* OSL CCIE Voice Lab Exam >> *Subject:* Re: [OSL | CCIE_Voice] 0 Conf max sessions >> >> >> I have 1-3 configured under controller. >> >> I am able to see 1-8 available resources under my transcoder profile but >> no luck with conference. I know conference will not show up if you enable >> transcoder profile first. No matter what I tried I can not get it to run. >> >> >> >> On Jul 6, 2008, at 11:44 AM, ccievoice1 wrote: >> >> have you utilized all the dsp resources for your pri-group? >> >> On Sun, Jul 6, 2008 at 11:31 PM, Mehmet Tufekci <[EMAIL PROTECTED]> >> wrote: >> >>> Hi All, >>> >>> I can not figure out why maximum session <0-0> is showing under >>> conference profile. >>> >>> I did not enable transcoding profile yet. >>> >>> voice-card 0 >>> dspfarm >>> dsp services dspfarm >>> ! >>> ! >>> ! >>> interface Loopback0 >>> ip address 172.3.102.1 255.255.255.255 >>> ip ospf network point-to-point >>> ! >>> ! >>> sccp local Loopback0 >>> sccp >>> ! >>> dspfarm profile 1 transcode >>> codec g711ulaw >>> codec g729r8 >>> shutdown >>> ! >>> dspfarm profile 2 conference >>> codec g711ulaw >>> codec g729r8 >>> shutdown >>> ! >>> >>> >>> >> >> >