Try this...

dial-peer voice 3983 voip
 destination-pattern 5000
 session target ipv4:10.0.0.131
 dtmf-relay h245-alphanumeric
 codec g711ulaw
 no vad


dial-peer voice 3984 voip
 service aa <http://10.0.0.131/>
 incoming called-number 5000
 dtmf-relay h245-alphanumeric
 codec g711ulaw
 no vad



On Sat, Aug 23, 2008 at 1:10 PM, Jonathan Charles <[EMAIL PROTECTED]> wrote:

> So, I configured B-ACD (from the config on Cisco's site...) and when I call
> it I get dead air...
>
>
> !
> !
> interface FastEthernet0/0
>  ip address 10.0.0.131 255.255.255.0
>  speed auto
>  no cdp log mismatch duplex
>  h323-gateway voip interface
>  h323-gateway voip id home ipaddr 10.0.0.63 1719
>  h323-gateway voip h323-id CCME
>  h323-gateway voip tech-prefix 2#
>  h323-gateway voip bind srcaddr 10.0.0.131
> !
>
> !
> application
>   service queue flash:app-b-acd-2.1.2.2.tcl
>   param queue-len 15
>   param aa-hunt3 2001
>   param queue-manager-debugs 1
>   param aa-hunt2 2000
>   param number-of-hunt-grps 2
>   !
>   service aa flash:app-b-acd-aa-2.1.2.2.tcl
>   paramspace english index 1
>   param number-of-hunt-grps 2
>   param handoff-string aa
>   param dial-by-extension-option 1
>   paramspace english language en
>   param max-time-vm-retry 2
>   param aa-pilot 5000
>   paramspace english location flash:
>   param second-greeting-time 60
>   param welcome-prompt _bacd_welcome.au
>   param call-retry-timer 15
>   param voice-mail 4500
>   param max-time-call-retry 700
>   param service-name queue
>   !
>   global
>   service alternate Default
>  !
>
>
> dial-peer voice 3983 voip
>  service aa
>  destination-pattern 5000
>  session target ipv4:10.0.0.131
>  incoming called-number 5000
>  dtmf-relay h245-alphanumeric
>  codec g711ulaw
>  no vad
>
>
>
> !
> ephone-hunt 1 sequential
>  pilot 2000
>  list 3003, 3002
>  statistics collect
> !
> !
> !
> !
> ephone-hunt 2 sequential
>  pilot 2001
>  list 3002, 3003
> !
> !
>
>
> CCME#dir
> Directory of flash:/
>
>     1  -rw-    22201360                    <no date>
> c1700-spservicesk9-mz.124-15.T3.bin
>     2  -rw-       11650   Aug 4 2008 12:04:24 +00:00
> app-cme-did-2.0.0.0.ReadMe
>     3  -rw-       15020   Aug 4 2008 12:04:25 +00:00
> app-cme-did-2.0.0.0.tcl
>     5  -rw-       18836   Aug 4 2008 12:04:49 +00:00
> app-b-acd-2.1.2.2-ReadMe.txt
>     6  -rw-       24985   Aug 4 2008 12:04:49 +00:00  app-b-acd-2.1.2.2.tcl
>     7  -rw-       35485   Aug 4 2008 12:04:50 +00:00
> app-b-acd-aa-2.1.2.2.tcl
>     8  -rw-       75650   Aug 4 2008 12:04:51 +00:00
> en_bacd_allagentsbusy.au
>     9  -rw-       83291   Aug 4 2008 12:04:52 +00:00  en_bacd_disconnect.au
>    10  -rw-       63055   Aug 4 2008 12:04:52 +00:00  en_bacd_enter_dest.au
>    11  -rw-       37952   Aug 4 2008 12:04:52 +00:00
> en_bacd_invalidoption.au
>    12  -rw-      496521   Aug 4 2008 12:04:58 +00:00
> en_bacd_music_on_hold.au
>    13  -rw-      123446   Aug 4 2008 12:05:00 +00:00
> en_bacd_options_menu.au
>    14  -rw-       42978   Aug 4 2008 12:05:00 +00:00  en_bacd_welcome.au
>    15  -rw-       34794   Aug 4 2008 12:05:00 +00:00
> en_bacd_xferto_operator.au
>    72  -rw-       42484                    <no date>  en_dest_busy.au
>    73  -rw-       26376                    <no date>
> en_dest_unreachable.au
>    74  -rw-       14352                    <no date>  en_disconnect.au
>    75  -rw-       19512                    <no date>  en_enter_dest.au
>    76  -rw-       17167                    <no date>  en_reenter_dest.au
>    77  -rw-       17486                    <no date>  en_welcome.au
>    78  -rw-        6627                    <no date>  its-CISCO.2.0.1.0.tcl
>    79  -rw-        3106                    <no date>
> its_Cisco.2.0.1.0.ReadMe
>
>
>
> Any ideas?
>
>
>
> Jonathan
>
>
>

Reply via email to