Ok, and the MoH stream is multicast or unicast? did you confim it with perfmon?
//r.a. On Tue, Sep 2, 2008 at 11:06 AM, James Key <[EMAIL PROTECTED]> wrote: > This is checked for both audio sources. being used. > > ------------------------------ > *From:* Ricardo Arevalo [mailto:[EMAIL PROTECTED] > *Sent:* Tue 9/2/2008 10:02 AM > *To:* James Key > *Cc:* ccie_voice@onlinestudylist.com > *Subject:* Re: [OSL | CCIE_Voice] PSTN call issue > > ? > Try checking "play continuously (repeat)" on Music on Hold Audio Source. > > //r.a. > > On Tue, Sep 2, 2008 at 10:44 AM, James Key <[EMAIL PROTECTED]> wrote: > >> ?When placing a call out the pstn from either HQ or BR1 and then >> placing the call on hold, after approx 30 seconds the call goes to fast busy >> or hangs up. Multicast MOH is configured and working. >> >> Not sure were to look to resolve issue. any ideas? >> >> >> James >> >> NOTICE: This electronic mail message and any files transmitted with it are >> intended >> exclusively for the individual or entity to which it is addressed. The >> message, >> together with any attachment, may contain confidential and/or privileged >> information. >> Any unauthorized review, use, printing, saving, copying, disclosure or >> distribution >> is strictly prohibited. If you have received this message in error, please >> immediately advise the sender by reply email and delete all copies. >> >> > NOTICE: This electronic mail message and any files transmitted with it are > intended > exclusively for the individual or entity to which it is addressed. The > message, > together with any attachment, may contain confidential and/or privileged > information. > Any unauthorized review, use, printing, saving, copying, disclosure or > distribution > is strictly prohibited. If you have received this message in error, please > immediately advise the sender by reply email and delete all copies. > >
