Well, sorta...

The problem is that MGCP monitors the RTCP channel... if you are streaming
the media from the router's flash, there is no RTCP channel back to CCM...
so it disconnects it after a time (I thought it was 60 secs)...

This disables that timer...



Jonathan

On Tue, Sep 2, 2008 at 10:55 AM, James Key <[EMAIL PROTECTED]> wrote:

>  That did it!  thanks Johathan.  I need to read up on what that command
> does.  Is it always needed for MGCP?
>
>
> James
>
> ------------------------------
> *From:* Jonathan Charles [mailto:[EMAIL PROTECTED]
> *Sent:* Tue 9/2/2008 10:51 AM
> *To:* James Key
> *Cc:* ccie_voice@onlinestudylist.com
> *Subject:* Re: [OSL | CCIE_Voice] PSTN call issue
>
> ?
> MGCP?
>
> Add this:
>
> no mgcp timer receive-rtcp
>
>
>
> Jonathan
>
> On Tue, Sep 2, 2008 at 9:44 AM, James Key <[EMAIL PROTECTED]> wrote:
>
>> ?When placing a call out the pstn from either HQ or BR1 and then
>> placing the call on hold, after approx 30 seconds the call goes to fast busy
>> or hangs up.   Multicast MOH is configured and working.
>>
>> Not sure were to look to resolve issue.  any ideas?
>>
>>
>> James
>>
>> NOTICE: This electronic mail message and any files transmitted with it are 
>> intended
>> exclusively for the individual or entity to which it is addressed. The 
>> message,
>> together with any attachment, may contain confidential and/or privileged 
>> information.
>> Any unauthorized review, use, printing, saving, copying, disclosure or 
>> distribution
>> is strictly prohibited. If you have received this message in error, please
>> immediately advise the sender by reply email and delete all copies.
>>
>>
> NOTICE: This electronic mail message and any files transmitted with it are 
> intended
> exclusively for the individual or entity to which it is addressed. The 
> message,
> together with any attachment, may contain confidential and/or privileged 
> information.
> Any unauthorized review, use, printing, saving, copying, disclosure or 
> distribution
> is strictly prohibited. If you have received this message in error, please
> immediately advise the sender by reply email and delete all copies.
>
>

Reply via email to