Hi James, I did configure IP unnumbered and did configure a different ip range for the service engine.
I tried the network "IP of service engine" area 1 in the router ospf mode but no luck. I just tried Kevin's suggestion to include the "ip ospf network point-to-point" in the br2 loopback interface, it worked. So thank you all. Suresh ----- Original Message ---- From: James Key <> To: Suresh Solomon <[EMAIL PROTECTED]>; ccie_voice@onlinestudylist.com Sent: Tuesday, October 21, 2008 9:25:29 AM Subject: RE: [OSL | CCIE_Voice] IP connecttivity to CUE module RE: [OSL | CCIE_Voice] IP connecttivity to CUE module Did you configure IP unnumbered, or did you give the service-module an address on a different network? If using a different network, make sure you are advertising it in your routing protocol. James -----Original Message----- From: [EMAIL PROTECTED] on behalf of Suresh Solomon Sent: Mon 10/20/2008 5:09 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] IP connecttivity to CUE module Hi All, 1. I have CUE installed on Branch 2. From the BR2 I am able to ping the service engine ip address. >From the HQ I am unable to ping the IP of the service engine module. Is this the way it works or have I made a mistake? 2. CATOS. Presently the CAt6503 has ios installed on this. Can I boot to a flash disk to boot CATOS. And then remove the disk and it boots as it currently does? e.g. Like on a pc when you boot to a USB with linux and without the USB it boots to Windows . Thank you Suresh __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
