Vik, Put in the Sub,Pub (not Pub,Sub).
On Mon, Jan 12, 2009 at 3:03 PM, Christian Hennrich < christian.hennr...@intact-is.com> wrote: > Vik, Ryan, > > I have to 101% to agree with Ryan, that I ran in the same problem, if I'm > using pub and sub. Only using pub works. > > I'm renaming the defautl DP to HQ and use that for the CTI Ports. > > VIK do you rename the default DP or are you creating a new one? > > Regards > > Vik Malhi schrieb: > >> Hmmm...I'm not running into that myself. I define the JTAPI provider like >> so: 10.x.200.21,10.x.200.20 (PUB,SUB). >> >> Then ensure CTI Manager is running on both. I've never seen what you are >> describing before:-( >> -- >> Vik Malhi – CCIE #13890, CCSI #31584 >> Senior Technical Instructor - IPexpert, Inc. >> >> Telephone: +1.810.326.1444 >> Fax: +1.810.454.0130 >> Mailto: _vma...@ipexpert.com >> >> _ >> Join our free online support and peer group communities: >> _http://www.IPexpert.com/communities >> _IPexpert - The Global Leader in Self-Study, Classroom-Based, >> Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE >> R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and >> CCIE Storage Lab Certifications. >> >> >> >> >> >> >> >> ------------------------------------------------------------------------ >> *From: *Ryan Trauernicht <ryanstudyvo...@gmail.com> >> *Date: *Mon, 12 Jan 2009 13:30:19 -0600 >> *To: *Vik Malhi <vma...@ipexpert.com> >> *Cc: *"ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> >> *Subject: *Re: [OSL | CCIE_Voice] IPCC JTAPI Control Group Hanging >> >> Yup that is exactly what I do. In CM i have 4 defined DP (HQ, SiteB, 711, >> 729). In IPCC I see 5 (adding in Default). I pick the HQ DP for the adding >> in JTAPI and it just hangs. >> >> >> Only way I can get around it was making the JTAPI integration just point >> to publisher. >> >> >> >> On Mon, Jan 12, 2009 at 1:08 PM, Vik Malhi <vma...@ipexpert.com> wrote: >> >> When you use "Default" DP it literally looks for a DP called >> "Default" and will not use the default defined in Device Defaults >> with CCM. >> >> Try saying the above statement 10 times! >> >> If you rename the Default DP to "HQ" then when adding the JTAPI Call >> Control Group it will hang. Do not do this- select the "HQ" DP. >> >> -- Vik Malhi – CCIE #13890, CCSI #31584 >> Senior Technical Instructor - IPexpert, Inc. >> >> Telephone: +1.810.326.1444 >> Fax: +1.810.454.0130 >> Mailto: _vma...@ipexpert.com <http://vma...@ipexpert.com> >> >> _ >> Join our free online support and peer group communities: >> _http://www.IPexpert.com/communities >> _IPexpert - The Global Leader in Self-Study, Classroom-Based, >> Video-On-Demand and Audio Certification Training Tools for the Cisco >> CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE >> Voice Lab and CCIE Storage Lab Certifications. >> >> >> >> >> >> >> >> >> ------------------------------------------------------------------------ >> *From: *Ryan Trauernicht <ryanstudyvo...@gmail.com >> <http://ryanstudyvo...@gmail.com> > >> *Date: *Sun, 11 Jan 2009 16:46:39 -0600 >> *To: *"ccie_voice@onlinestudylist.com >> <http://ccie_voice@onlinestudylist.com> " >> <ccie_voice@onlinestudylist.com >> <http://ccie_voice@onlinestudylist.com> > >> *Subject: *[OSL | CCIE_Voice] IPCC JTAPI Control Group Hanging >> >> >> What is the work around for IPCC express when trying to add in a >> JTAPI controlled group with the default DP? >> >> It just sits there and does nothing. >> >> Only way I found around it is to set the JTAPI integration only to >> the publisher and configure everything... then add in the sub later. >> >> Thanks, >> Ryan Trauernicht >> >> >> >> >> ______________________________________________________________________ >> This email has been scanned by the MessageLabs Email Security System. >> For more information please visit http://www.messagelabs.com/email >> ______________________________________________________________________ >> >> ______________________________________________________________________ >> This email has been scanned by the MessageLabs Email Security System. >> For more information please visit http://www.messagelabs.com/email >> ______________________________________________________________________ >> >
