Hope this helps: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
P1_HQ_RTR#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES NVRAM up up FastEthernet0/0.110 unassigned YES unset up up FastEthernet0/0.210 10.1.200.3 YES NVRAM up up FastEthernet0/1 unassigned YES NVRAM administratively down down Serial0/3/0 unassigned YES NVRAM up up Serial0/3/0.1 162.1.101.1 YES NVRAM up up Serial0/3/0.2 162.1.102.1 YES NVRAM up up Serial0/3/1 unassigned YES NVRAM down down Loopback0 172.1.100.1 YES NVRAM up up P1_HQ_RTR# P1_HQ_RTR#sh ip ospf nei router ospf 1 log-adjacency-changes network 10.1.100.0 0.0.0.255 area 0 network 10.1.200.0 0.0.0.255 area 0 network 162.1.101.0 0.0.0.255 area 0 network 162.1.102.0 0.0.0.255 area 0 network 172.1.100.0 0.0.0.255 area 0 network 192.1.102.0 0.0.0.255 area 0 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Br1: P1_BR1_RTR#sh ip int bri Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES NVRAM up down FastEthernet0/1 unassigned YES NVRAM administratively down down FastEthernet0/1/0 unassigned YES unset up up FastEthernet0/1/1 unassigned YES unset up up FastEthernet0/1/2 unassigned YES unset up down FastEthernet0/1/3 unassigned YES unset up down FastEthernet0/1/4 unassigned YES unset up down FastEthernet0/1/5 unassigned YES unset up down FastEthernet0/1/6 unassigned YES unset up down FastEthernet0/1/7 unassigned YES unset up down FastEthernet0/1/8 unassigned YES unset up down Serial0/2/0:0 unassigned YES unset down down Serial0/2/0:1 unassigned YES unset down down Serial0/2/0:2 unassigned YES unset down down Serial0/2/0:23 unassigned YES NVRAM up up Serial0/3/0 unassigned YES NVRAM up up Serial0/3/0.1 162.1.101.2 YES NVRAM up up Serial0/3/1 unassigned YES NVRAM administratively down down Vlan1 unassigned YES NVRAM up up Vlan110 unassigned YES NVRAM up up Vlan210 10.1.201.1 YES NVRAM up up Loopback0 172.1.101.1 YES NVRAM up up P1_BR1_RTR# P1_BR1_RTR#sh ip ospf nei Neighbor ID Pri State Dead Time Address Interface 172.1.100.1 0 FULL/ - 00:00:35 162.1.101.1 Serial0/3/0.1 P1_BR1_RTR# xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx Br2: P1_BR2_RTR#sh ip int brie Interface IP-Address OK? Method Status Protoco FastEthernet0/0 unassigned YES NVRAM up up FastEthernet0/0.110 unassigned YES unset up up FastEthernet0/0.210 10.1.202.1 YES NVRAM up up Service-Engine0/1 10.1.202.1 YES TFTP up up FastEthernet0/1 unassigned YES NVRAM administratively down down Serial0/0/0:0 unassigned YES unset down down Serial0/0/0:1 unassigned YES unset down down Serial0/0/0:2 unassigned YES unset down down Serial0/0/0:15 unassigned YES NVRAM up up Serial0/3/0 unassigned YES NVRAM up up Serial0/3/0.1 162.1.102.2 YES NVRAM up up Serial0/3/1 unassigned YES NVRAM administratively down down Loopback0 172.1.102.1 YES NVRAM up up P1_BR2_RTR# P1_BR2_RTR#sh ip ospf nei Neighbor ID Pri State Dead Time Address Interface 172.1.100.1 0 FULL/ - 00:00:34 162.1.102.1 Serial0/3/0.1 P1_BR2_RTR# From: jgar...@gmail.com [mailto:jgar...@gmail.com] Sent: Saturday, January 17, 2009 12:02 PM To: Greg Hauser; ccie_voice-boun...@onlinestudylist.com Cc: 'CCIE Voice Maillist' Subject: Re: [OSL | CCIE_Voice] [OSPF Routing issue What ip is assigned to the other interfaces? Sent from my BlackBerry Smartphone provided by Alltel _____ From: "Greg Hauser" Date: Sat, 17 Jan 2009 11:37:27 -0700 Subject: Re: [OSL | CCIE_Voice] [OSPF Routing issue Can anyone assist- I have seen this routing issue before but forgot how to fix. The issue is the ospf routing configuration only reports using the serial interface and will not pickup the LAN or Ethernet ports in the 10.1.0.0 network. Here is HQ rtr ospf config- router ospf 1 log-adjacency-changes network 10.1.100.0 0.0.0.255 area 0 network 10.1.200.0 0.0.0.255 area 0 network 162.1.101.0 0.0.0.255 area 0 network 162.1.102.0 0.0.0.255 area 0 network 172.1.100.0 0.0.0.255 area 0 network 192.1.102.0 0.0.0.255 area 0 ! Here is the s hip ospf nei command- P1_HQ_RTR#sh ip ospf nei Neighbor ID Pri State Dead Time Address Interface 172.1.102.1 0 FULL/ - 00:00:35 162.1.102.2 Serial0/3/0.2 172.1.101.1 0 FULL/ - 00:00:39 162.1.101.2 Serial0/3/0.1 P1_HQ_RTR# Any ideas would be greatly appreciated. Thanks.. Greg Hauser