That is what I thought... but page 197 of CM SRND: "It is capable of sending multiple one-way RTP streams to devices such as Cisco IP phones or gateways, and it uses SCCP messages to establish the RTP stream."
On Mon, Jan 26, 2009 at 10:43 AM, Mark Snow <ms...@ipexpert.com> wrote: > Juan is correct. You cannot play ANN to a GW of any sort, only to SCCP > devices. > > Mark SnowSr Technical Instructor > IPexpert, Inc. > > Sent from my iPhone > > On Jan 26, 2009, at 11:23 AM, Ryan Trauernicht <ryanstudyvo...@gmail.com> > wrote: > > That is what I thought.... but I opened a TAC case and they claim you can, > but cant figure out how. > Thanks, > Ryan Trauernicht > > On Mon, Jan 26, 2009 at 3:21 AM, Juan < <juan.c...@gmail.com> > juan.c...@gmail.com> wrote: > >> I remember reading in the SRND that you can only engage the annunciator >> for SCCP devices if I remember correctly - so not to the PSTN. >> >> cheers, >> Juan >> >> >> On Sun, Jan 25, 2009 at 5:48 PM, Ryan Trauernicht <<ryanstudyvo...@gmail.com> >> ryanstudyvo...@gmail.com> wrote: >> >>> Not sure why you are going through all that trouble and not just sending >>> it to unity as a call handler and hang up after message played. >>> I don't know how to play an ANN from a PSTN call, I have engaged TAC and >>> they are still working on it and they can't even figure it out right now. >>> >>> Any ideas? >>> >>> Thanks, >>> Ryan Trauernicht >>> >>> On Sun, Jan 25, 2009 at 3:42 AM, Kapil Atrish <<kapilatr...@hotmail.com> >>> kapilatr...@hotmail.com> wrote: >>> >>>> Hi list, >>>> >>>> Following I did: >>>> >>>> Create a new MOH Audio Source using "AAExtnOutOfService.wav". Prompt >>>> available inside Wfavvid folder >>>> >>>> Create a TP covering all unassigned DNs for example: 11xx, do Called >>>> party Xform to 1155 >>>> >>>> Create a AC Pilot 1155, give any DP say: ANN_PSTN >>>> AC Hunt-Group>>Give any AC user. No need to login to Attendant Console. >>>> Run acconfig.bat>>Enable Queuing >>>> Inside DP: ANN_PSTN give User Hold MOH Source as >>>> "AAExtnOutOfService.wav". >>>> >>>> Now, whenever you dial any unassigned number withing range 11xx, you'll >>>> hear "AAExtnOutOfService.wav" but the problem is that I am not able to make >>>> the PSTN call drop. >>>> >>>> I tried routing calls to TP inside AC Hunt-Group>>Always Route member is >>>> TP>>TP has Block Pattern --Not working. >>>> >>>> "AAExtnOutOfService.wav"keeps on playing. >>>> >>>> I tried routing calls to Route-Point (Always Route Member) inside AC >>>> Hunt-Group>>CTI_RP has Forward all to TP>>TP has Block Pattern --Not >>>> working. "AAExtnOutOfService.wav"keeps on playing. >>>> >>>> I tried routing calls to a registered Phone DN as Always Route >>>> Member>>Forward all to TP>>>>TP has Block Pattern --Not working. >>>> "AAExtnOutOfService.wav"keeps on playing. >>>> >>>> Can someone help me achieve call drop here without using >>>> IPCCX/Unity/TCL? >>>> >>>> >>>> Thanks, >>>> Kapil Atrish >>>> >>>> ------------------------------ >>>> Rediscover the magic of Windows & WIN a Windows Vista laptop & Windows >>>> mobile phone at <http://www.windowsandme.com>www.windowsandme.com Try >>>> it now! <http://www.windowsandme.com> >>>> >>> >>> >> >