1. Is the EM correct on br1 phones
2. There is no translation pattern causing this.

--- On Sat, 2/21/09, Tony reyes <treye...@yahoo.com> wrote:

From: Tony reyes <treye...@yahoo.com>
Subject: [OSL | CCIE_Voice] BR1 to unity VM in AAR mode
To: ccie_voice@onlinestudylist.com
Date: Saturday, February 21, 2009, 12:08 AM







Trying to get BR1 (MGCP GW) phones missed calls to be forwarded to Unity VM for 
users, but the redirecting number is not being sent with the correct 
information.
Somehow CM is prepending the wrong prefix for the BR1 phones?
Below is the output of show isdn Q931 of MGCP GW at BR1…
Any idea as to where to look for and fix the wrong prepending of prefix?
 
BR1 Phones <-> MGCP GW <-> PSTN/AAR <-> HQ 6608 <-> UCM/Unity
 
BR1-RTR#
Call from 911 comes into BR1 site phone number 2003 with Ext Number Mask of 
617-521-2003
Feb 20 17:33:03.817: ISDN Se1/0:23 Q931: RX <- SETUP pd = 8  callref = 0x017F 
        Bearer Capability i = 0x8090A2 
                Standard = CCITT 
                Transfer Capability = Speech  
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1 
        Progress Ind i = 0x8583 - Origination address is non-ISDN  
        Calling Party Number i = 0x0080, '911' 
                Plan:Unknown, Type:Unknown 
        Called Party Number i = 0xA1, '6175212003' 
                Plan:ISDN, Type:National
Feb 20 17:33:04.189: ISDN Se1/0:23 Q931: TX -> CALL_PROC pd = 8  callref = 
0x817F 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1
Feb 20 17:33:04.189: ISDN Se1/0:23 Q931: TX -> ALERTING pd = 8  callref = 
0x817F 
        Progress Ind i = 0x8088 - In-band info or appropriate now available 
Call is not answered by ext 2003 and is forwarded to Unity via AAR PSTN
Feb 20 17:33:12.814: ISDN Se1/0:23 Q931: TX -> SETUP pd = 8  callref = 0x0006 
        Bearer Capability i = 0x8090A2 
                Standard = CCITT 
                Transfer Capability = Speech  
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA98383 
                Exclusive, Channel 3 
        Progress Ind i = 0x8583 - Origination address is non-ISDN  
        Calling Party Number i = 0x0081, '911' 
                Plan:Unknown, Type:Unknown 
        Called Party Number i = 0x80, '12122211600' 
                Plan:Unknown, Type:Unknown 
        Redirecting Number i = 0x000082, '2122212003' <- This number should be 
'6175212003'
                Plan:Unknown, Type:Unknown
Feb 20 17:33:12.846: ISDN Se1/0:23 Q931: RX <- CALL_PROC pd = 8  callref = 
0x8006 
        Channel ID i = 0xA98383 
                Exclusive, Channel 3
Feb 20 17:33:13.462: ISDN Se1/0:23 Q931: RX <- ALERTING pd = 8  callref = 
0x8006 
        Progress Ind i = 0x8088 - In-band info or appropriate now available 
Feb 20 17:33:13.630: ISDN Se1/0:23 Q931: RX <- CONNECT pd = 8  callref = 0x8006 
        Display i = 'Voicemail'
Feb 20 17:33:14.046: ISDN Se1/0:23 Q931: TX -> CONNECT pd = 8  callref = 0x817F 
        Display i = 'Voicemail'
Feb 20 17:33:14.058: ISDN Se1/0:23 Q931: RX <- CONNECT_ACK pd = 8  callref = 
0x017F
Feb 20 17:33:14.066: ISDN Se1/0:23 Q931: TX -> CONNECT_ACK pd = 8  callref = 
0x0006
Feb 20 17:33:19.186: ISDN Se1/0:23 Q931: RX <- DISCONNECT pd = 8  callref = 
0x017F 
        Cause i = 0x8290 - Normal call clearing
BR1-RTR#
 



      

Reply via email to