wt abt if you call from HQ phone 1001 to 2003 in AAT mode ???
--- On Sat, 2/21/09, Tony reyes <treye...@yahoo.com> wrote:
From: Tony reyes <treye...@yahoo.com>
Subject: Re: [OSL | CCIE_Voice] BR1 to unity VM in AAR mode
To: anil...@yahoo.com, ccie_voice@onlinestudylist.com
Date: Saturday, February 21, 2009, 1:33 AM
1. Yes, the external number mask is set correct, as a matter of fact if you hit
the message button on the phone it goes to the correct VM extension and asks
for the pin so it works correctly, this happens when the call is missed and
goes to VM uding the redirect number...
2. there is no Translation patern in CM
From: anil batra <anil...@yahoo.com>
To: ccie_voice@onlinestudylist.com; Tony reyes <treye...@yahoo.com>
Sent: Friday, February 20, 2009 1:26:27 PM
Subject: Re: [OSL | CCIE_Voice] BR1 to unity VM in AAR mode
1. Is the EM correct on br1 phones
2. There is no translation pattern causing this.
--- On Sat, 2/21/09, Tony reyes <treye...@yahoo.com> wrote:
From: Tony reyes <treye...@yahoo.com>
Subject: [OSL | CCIE_Voice] BR1 to unity VM in AAR mode
To: ccie_voice@onlinestudylist.com
Date: Saturday, February 21, 2009, 12:08 AM
Trying to get BR1 (MGCP GW) phones missed calls to be forwarded to Unity VM for
users, but the redirecting number is not being sent with the correct
information.
Somehow CM is prepending the wrong prefix for the BR1 phones?
Below is the output of show isdn Q931 of MGCP GW at BR1…
Any idea as to where to look for and fix the wrong prepending of prefix?
BR1 Phones <-> MGCP GW <-> PSTN/AAR <-> HQ 6608 <-> UCM/Unity
BR1-RTR#
Call from 911 comes into BR1 site phone number 2003 with Ext Number Mask of
617-521-2003
Feb 20 17:33:03.817: ISDN Se1/0:23 Q931: RX <- SETUP pd = 8 callref = 0x017F
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8583 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '911'
Plan:Unknown, Type:Unknown
Called Party Number i = 0xA1, '6175212003'
Plan:ISDN, Type:National
Feb 20 17:33:04.189: ISDN Se1/0:23 Q931: TX -> CALL_PROC pd = 8 callref =
0x817F
Channel ID i = 0xA98381
Exclusive, Channel 1
Feb 20 17:33:04.189: ISDN Se1/0:23 Q931: TX -> ALERTING pd = 8 callref =
0x817F
Progress Ind i = 0x8088 - In-band info or appropriate now available
Call is not answered by ext 2003 and is forwarded to Unity via AAR PSTN
Feb 20 17:33:12.814: ISDN Se1/0:23 Q931: TX -> SETUP pd = 8 callref = 0x0006
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98383
Exclusive, Channel 3
Progress Ind i = 0x8583 - Origination address is non-ISDN
Calling Party Number i = 0x0081, '911'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '12122211600'
Plan:Unknown, Type:Unknown
Redirecting Number i = 0x000082, '2122212003' <- This number should be
'6175212003'
Plan:Unknown, Type:Unknown
Feb 20 17:33:12.846: ISDN Se1/0:23 Q931: RX <- CALL_PROC pd = 8 callref =
0x8006
Channel ID i = 0xA98383
Exclusive, Channel 3
Feb 20 17:33:13.462: ISDN Se1/0:23 Q931: RX <- ALERTING pd = 8 callref =
0x8006
Progress Ind i = 0x8088 - In-band info or appropriate now available
Feb 20 17:33:13.630: ISDN Se1/0:23 Q931: RX <- CONNECT pd = 8 callref = 0x8006
Display i = 'Voicemail'
Feb 20 17:33:14.046: ISDN Se1/0:23 Q931: TX -> CONNECT pd = 8 callref = 0x817F
Display i = 'Voicemail'
Feb 20 17:33:14.058: ISDN Se1/0:23 Q931: RX <- CONNECT_ACK pd = 8 callref =
0x017F
Feb 20 17:33:14.066: ISDN Se1/0:23 Q931: TX -> CONNECT_ACK pd = 8 callref =
0x0006
Feb 20 17:33:19.186: ISDN Se1/0:23 Q931: RX <- DISCONNECT pd = 8 callref =
0x017F
Cause i = 0x8290 - Normal call clearing
BR1-RTR#
